Rehau PVC edgebanding 302044-197 provides a dedicated edge treatment for panels, so exposed substrate gets a finished look instead of a raw edge. The 15/16 inch width covers standard panel edges with a bit of tolerance, which helps when trimming flush after bonding. The 1mm thickness gives a solid edge profile, so the banding feels substantial at corners and along runs. The PVC construction creates a uniform material along the length, which supports consistent trimming and scraping during fabrication. The 600 ft length in a single run supports longer production work, so multiple cabinet pieces or casework sections can be edged from the same roll. The C100136 LAC identification in the description ties this roll to a specific finish code, which helps match it to panels that share the same system reference on shop drawings or cutlists.
The 15/16 inch width of this Rehau PVC edge banding gives installers room to register the band on the panel edge before trimming, which supports straighter application along long cabinet sides or tall doors. The 1mm thickness works well with standard trimming tools, so excess can be cut flush without removing too much material from the panel face. The PVC construction keeps the profile uniform, which supports even pressure when using common edge-banding application equipment. The 600 ft length allows longer continuous runs, so edges on multiple cabinets or casework segments can be processed in a single workflow without stopping to change rolls.
This Rehau PVC edgebanding, identified as 302044-197, fits projects that call for PVC edge treatment rather than leaving raw core or exposed laminate edges. The 15/16 inch by 1mm format suits panel-based construction where edges must match a defined color and finish system referenced as C100136 LAC. The roll length of 600 ft supports cabinetry, casework, or woodworking runs where many parts share the same finish, so doors, drawer fronts, and cabinet sides can be edged from the same material. The PVC material fits applications where a consistent, machinable edge is preferred for trimming, scraping, and light profiling along the edge line.
The 15/16 inch width gives extra coverage beyond typical panel thickness, which supports accurate registration of the band before trimming and reduces the chance of leaving exposed substrate after flush cutting. The 1mm thickness allows a defined edge that holds shape during scraping and touch-up, which helps keep edges visually consistent from one cabinet part to the next. The PVC construction makes the banding uniform along the 600 ft length, which supports repeatable behavior under trimmers and edge tools across multiple parts. The specific identifiers Rehau 302044-197 and C100136 LAC help align this roll with panel and design schedules that reference the same codes, which supports consistent color and finish matching when building or replacing components.
Rehau PVC edgebanding 302044-197 is described as 15/16 inch wide and 1mm thick, which supports edging standard panel thicknesses while leaving material to trim back to a clean, flush edge.
The 1mm thickness of this PVC edge banding gives a solid edge profile that trims cleanly, which helps maintain a defined corner and consistent appearance along cabinet and casework edges.
This Rehau 302044-197 PVC edgebanding is specified at 600 ft, which supports edging multiple components or full cabinet runs from a single, continuous roll.
The C100136 LAC description ties this edgebanding to a specific finish reference, which helps match it to boards or design schedules using the same code for consistent appearance.
The PVC material provides a uniform band along the length, which responds predictably to trimming and scraping so installers can repeat the same workflow across parts.
The 15/16 inch width extends beyond typical panel thickness, which allows slight overhang during application and supports trimming back to a clean, fully covered edge.
This Rehau PVC edgebanding 302044-197 combines a 15/16 inch width, 1mm thickness, and 600 ft length, so panels using the matching C100136 LAC reference can receive consistent, finished edges. For projects built around this specific Rehau color code, adding this edge banding aligns the exposed edges with the design intent across cabinet and casework components.
Sold In: 1 Roll