Rehau PVC edgebanding 302114-006 1-5/16 x 3mm

Rehau PVC Edgebanding For Clean Panel Edges

Rehau PVC edgebanding identified as 302114-006 provides a dedicated edge treatment solution for woodworking projects where panels need a finished edge that matches a specified PVC band. The manufacturer part number 302114-006 gives installers a precise reference when matching drawings, shop lists, or past jobs that already call out this exact Rehau, Inc. material. The SAP description 1-5/16X3MM FLEX C200008 LAC 300FT defines a width of 1-5/16 inch and a thickness of 3mm, so fabricators can plan layouts for panels that require that specific edge coverage and build their machining steps around that dimension. The flexible designation in the description points to a band that is designed to wrap along panel edges rather than act as a rigid profile, which supports common edge banding workflows on straight runs handled at the bench, on-site, or on standard shop equipment.

Key Rehau Edge Banding Details For Projects

• The product is classified as edge banding, so it serves specifically as a finishing layer on exposed panel edges, allowing shop teams to conceal core material and align with PVC-based design requirements in a repeatable way.
• The 1-5/16 inch width in the SAP description supports use on panels where that coverage is needed, helping installers select appropriate panel overhang and trimming steps so the band fully covers the edge zone during fabrication.
• The 3mm thickness noted in the description signals a robust edge layer compared with thinner bands, giving planners a known build-up to factor into door, drawer, or panel reveals when laying out clearances in cabinetry.
• The flexible descriptor in 1-5/16X3MM FLEX C200008 LAC 300FT indicates a bendable PVC strip rather than a stiff molding, which fits common edge banding sequences where the material must track along the edge through typical handling.
• The 300FT length called out in the SAP description gives shops a defined run of material on a single part number, allowing estimators to correlate linear-edge requirements and job costing with this specific roll length.

Edgebanding Dimensions That Guide Installation Setup

The SAP description 1-5/16X3MM FLEX C200008 LAC 300FT gives installers the working dimensions they need to organize their edgebanding process around this Rehau PVC edgebanding. The 1-5/16 inch width supports planning for panel sizing so that after edgebanding and trimming, the finished edge still covers the substrate fully while keeping the face alignment within design tolerances. The 3mm thickness provides a consistent edge build that can be factored into hinge-side gaps, drawer spacing, and overall cabinet reveals whenever this banding is specified. Because the material is described as flexible PVC, it fits workflows that rely on a pliable strip feeding along panel edges, which aligns with common shop and jobsite handling while maintaining the product identity defined by the manufacturer.

How This Edge Banding Fits Woodworking Workflows

Where Rehau 302114-006 Edgebanding Is Typically Used

The product is categorized by Wurth Baer Supply as edge banding within Miscellaneous|Edgebanding, positioning it among materials used to finish exposed board edges in woodworking environments. The Rehau, Inc. branding identifies this as a PVC band from a manufacturer focused on these types of materials, which supports use anywhere drawings or standards reference Rehau PVC edgebanding. The SAP dimensions of 1-5/16 inch by 3mm guide its role on panels sized to accept that width and thickness, so casework, panels, or components designed around a 3mm build can rely on that specification. The 300FT notation in the description supports shop planning where multiple panels or repeated production runs call for the same edge treatment under one part number.

Why The 1-5/16 x 3mm Format Matters In Practice

The 1-5/16X3MM figure in the SAP description directly shapes how the Rehau 302114-006 edgebanding interacts with cabinet or panel layouts. A 1-5/16 inch width allows the band to cover standard panel thicknesses with extra material for trimming operations, supporting cleaner transitions from face to edge when machining or hand-trimming. The 3mm thickness creates an edge presence that can influence hardware alignment, so designers and installers can coordinate hinge cup positions, drawer clearances, and adjoining panel gaps to account for this specific edge build. The flexible PVC designation in the description indicates a bendable strip that suits common edgebanding processes where the material needs to follow straight panel edges without behaving like a rigid trim piece. The 300FT reference ties those dimensional and handling traits to a known run length, helping production teams map this Rehau PVC edgebanding to job schedules and repeat work by reusing the same manufacturer part number 302114-006 for consistent results.

Common Questions About Rehau PVC Edgebanding 302114-006

Select Rehau 302114-006 For Dimensioned Edge Work

The Rehau PVC edgebanding, manufacturer part 302114-006, gives woodworking professionals a PVC edge solution defined by a 1-5/16 inch width, 3mm thickness, and 300FT length. Those dimensions help align panel design, machining steps, and edge build with a single, repeatable Rehau part number sourced through Wurth Baer Supply.