Rehau PVC edgebanding 302114-066 is a flexible PVC edge banding from Rehau, Inc. that finishes exposed board edges, giving panels a defined edge line for cabinet and furniture projects. The 1-5/16 inch width covers common substrate thicknesses with a bit of margin, which helps installers trim flush without exposing the core. The 3mm thickness provides a substantial edge profile, which supports routed corners and creates a solid-feeling edge on doors, drawer fronts, and casework. The flexible C200173 LAC construction lets the material follow straight runs and gentle curves, so long edges and returns can be handled with one consistent banding. Supplied in a 300 foot length, it supports runs across multiple cabinets or a full room of casework under one part number, simplifying layout and repeat work for shops and installers.
This Rehau PVC edgebanding, identified as 1-5/16X3MM FLEX C200173 LAC 300FT, delivers a width and thickness combination suited to panel work. The 1-5/16 inch width gives enough coverage for typical cabinet-grade panels while preserving margin for trimming passes along both faces. The 3mm thickness produces a robust edge section, which supports clean scraping and sanding without cutting through to the core. The flexible designation in the SAP description signals that the banding is engineered to follow standard linear edges, supporting consistent alignment from piece to piece. Together, these size and construction details allow installers and shops to maintain a repeatable fit on cabinet doors, drawers, and carcass edges built from similar substrates.
The Rehau PVC edgebanding, identified under product class Edge Banding and category Miscellaneous|Edgebanding, is aimed at finishing exposed edges on cabinet and furniture components. Its 1-5/16 inch width lets it cover the face and back edges of panels built from common sheet goods, so door and drawer fronts gain a continuous PVC edge. The 3mm thickness is well suited where a more substantial edge is preferred, such as on frequently handled fronts or commercial casework. The flexible C200173 LAC construction supports typical straight cabinet edges, so tall pantry sides, upper cabinets, and base cabinets can share the same material. With a 300 foot length, the roll can support multiple rooms or repeated production runs built to the same specification, aligning with the needs of woodworking shops served by Wurth Baer Supply.
The defined 1-5/16X3MM size in the SAP description provides a clear dimension set, which simplifies machine setup for edgebanders, trimmers, and routers across jobs using this stock. The 3mm thickness gives enough material for consistent trimming and light profiling passes, which supports smooth transitions between the banded edge and the panel faces. The flexible C200173 LAC designation helps the banding track along continuous edges without buckling, which supports uniform glue lines and straight finished reveals. The 300 foot continuous length reduces changeovers, which helps maintain settings once dialed in for this specific width and thickness. The manufacturer part number 302114-066 ties all of these attributes to a single, repeatable spec, which supports accurate reordering and alignment between shop drawings and installed casework.
Rehau PVC edgebanding 302114-066 is identified as 1-5/16X3MM, so it provides 1-5/16 inch width and 3mm thickness for edge coverage and a substantial finished profile.
The 3mm thickness on this edge banding creates a pronounced edge that tolerates trimming and light profiling, giving cabinet doors and drawer fronts a solid, finished feel.
The FLEX C200173 LAC wording in the SAP description indicates a flexible PVC construction, which allows the edgebanding to follow typical cabinet edge runs for consistent application.
The SAP description specifies 300FT, so this Rehau PVC edgebanding roll provides 300 feet of material for extended runs or multiple cabinet projects.
This edge banding, listed under Edge Banding and Miscellaneous|Edgebanding, suits cabinet and furniture work where exposed panel edges need a finished PVC edge profile.
The 302114-066 manufacturer part number ties the 1-5/16X3MM FLEX C200173 LAC 300FT spec to a single identifier, supporting consistent reordering and matching across projects.
The Rehau PVC edgebanding, manufacturer part 302114-066, provides a 1-5/16 inch by 3mm flexible PVC edge solution under one clear specification. The combination of width, thickness, and 300 foot length supports shop workflows that rely on repeatable setups across multiple panels. As an Edge Banding product in the Miscellaneous|Edgebanding category from Rehau, Inc., it gives cabinet and furniture builders a focused option for finishing exposed panel edges. For projects built around this dimension set, selecting this Rehau PVC edgebanding aligns material choice with the intended panel thickness, edge profile, and run length.
Sold In: 1 Roll