Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau PVC edgebanding is a PVC edge banding product from Rehau, Inc. that covers and protects raw panel edges, so installers can finish cabinetry and casework with a consistent, job-ready edge detail. The SAP description 1-5/16X3MM FLEX C500006 LAC 300FT identifies this as a flexible strip approximately 1-5/16 inches wide and 3mm thick, which gives enough coverage for common board thicknesses while providing a substantial edge profile. The 300FT designation indicates a 300-foot length, allowing longer continuous runs on repetitive work before changing rolls, which helps maintain rhythm at the edgebander or bench. The product class Edge Banding defines its role in closing off exposed substrate, which supports a more professional finished appearance and helps avoid rough edges during everyday cabinet use.
The SAP description 1-5/16X3MM FLEX C500006 LAC 300FT links width, thickness, and length in one specification, so installers can match this Rehau PVC edgebanding to panels that need around 1-5/16 inches of coverage before trimming. The 3mm thickness gives more material at the edge, which supports clean trimming passes without cutting through to the substrate, important when running parts through edgebanders or working by hand. The 300-foot roll length supports a continuous installation sequence on multiple cabinets or case parts, which helps keep color and profile consistent across an entire project.
The SAP description dimension 1-5/16X3MM defines the working size of this Rehau PVC edgebanding, so it can be selected for panel edges where that width provides slight overhang for trimming. That overhang is useful when banding sides, shelves, or fronts, because it leaves enough material for edge trimmers to follow the face without tearing the surface. The 3mm thickness noted in the description creates a noticeable edge detail, which is often used on doors and drawer fronts where a thicker band can better stand up to regular handling. With the edge banding product class clearly specified, this roll is suited to jobs where covering raw panel edges is a core step, aligning with typical cabinet, fixture, or furniture workflows that use PVC strips along exposed sides.
The FLEX term in the SAP description shows that this Rehau PVC edgebanding is designed as a flexible strip, which matters when the substrate is not perfectly straight or when parts move through automatic equipment. That flexibility helps the band sit tight to the panel edge during application, reducing the chance of minor gaps that would show after trimming. The 300FT length supports production-style work, where many similar parts are processed in sequence and one continuous roll helps keep the setup stable. The manufacturer part number 302114-089 groups this specific color and size for ordering and reordering, so shops that standardize on a given edge detail can call out the same part for repeat projects.
The manufacturer part number 302114-089 identifies this exact Rehau PVC edgebanding variant, which helps shops lock in a consistent edge specification across jobs, keeping edge width and thickness the same from one run to the next. That consistency simplifies machine setups on edgebanders and trimmers, because once settings are dialed in for 3mm PVC at roughly 1-5/16 inches wide, the same configuration can be reused whenever this part number is pulled. The product class Edge Banding confirms its role specifically at the edge, so it fits directly into established sequences of cutting panels, banding edges, and then trimming and finishing.
The 300FT length in the SAP description also supports repeatability by allowing long, uninterrupted runs of the same material, which reduces transitions that could leave small visual changes between doors or panels. The combination of PVC material, as named in Rehau PVC edgebanding, and the FLEX designation supports continuous feeding through edge machinery, helping the strip track along the panel edge without resisting standard feed paths. Together, these documented details give installers and shops a clearly defined edge banding option that can be specified by part number and used wherever a 3mm, 1-5/16 inch flexible PVC edge strip is appropriate in the workflow.
Rehau PVC edgebanding 302114-089 is identified in the SAP description as 1-5/16X3MM, giving an approximately 1-5/16 inch width and 3mm thickness for trimming to a flush edge.
The 3mm thickness in the SAP description provides a thicker edge profile, supporting clean trimming passes and a more substantial feel on cabinet doors and drawer fronts during regular use.
The FLEX term in the SAP description indicates a flexible PVC strip, which helps the edgebanding follow panel edges and maintain contact along slight variations during application.
The SAP description 1-5/16X3MM FLEX C500006 LAC 300FT specifies a 300-foot length, supporting longer continuous runs on repetitive cabinet or casework parts.
This product is classified as Edge Banding, so it closes off raw panel edges on cabinetry and casework, creating a finished edge that aligns with surrounding faces.
The 1-5/16 inch width provides slight overhang on typical panels, which allows trimming tools to remove excess and leave a flush, even edge line.
Rehau PVC edgebanding 302114-089 from Wurth Baer Supply combines a documented 1-5/16X3MM FLEX C500006 LAC 300FT specification with a dedicated Edge Banding product class, so shops can select this roll when they need a flexible, 3mm PVC strip for covering panel edges.
Sold In: 1 Roll