Rehau PVC edgebanding 302114-093 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they present as a completed surface rather than raw substrate. The edge banding belongs to the edgebanding product class, so it serves as the transition strip between panel faces and core material on cabinetry or casework. The SAP description "1-5/16X3MM FLEX C100033 LAC 300FT" identifies it as an edge banding with a nominal 1-5/16 inch width and 3mm thickness, which provides a substantial edge profile suited to panels that require a thicker, more impact-ready band than thin tape. The same description specifies a 300ft length, giving enough continuous material to run multiple cabinets or a production batch without frequent roll changes. The FLEX designation in the description indicates a flexible construction, allowing the strip to follow standard cabinet lines and common contours as it is applied.
The SAP description "1-5/16X3MM FLEX C100033 LAC 300FT" establishes the installation-relevant size of this Rehau, Inc. PVC edge banding. The 1-5/16 inch width gives enough coverage to span the panel thickness and leave margin for trimming, which helps installers flush-trim both sides without risking a short edge. The 3mm thickness produces a solid band that interacts predictably with standard edge-trimming tools, so installers can set cutters or blades for a consistent pass. Because the description specifies 300ft per roll, shops can plan longer edging sequences on edgebanders or manual setups without stopping mid-run to change material.
This product is categorized as edgebanding in the Miscellaneous|Edgebanding category, so it is intended for finishing exposed edges on panels used in woodworking, cabinetry, or similar projects. The 1-5/16 inch width described as "1-5/16X3MM" matches common panel thickness ranges where installers want coverage that slightly exceeds the core dimensions, allowing a clean trim on both faces. Because the material is identified as PVC edgebanding, it works within typical PVC-edge cabinet and furniture builds where panels need a durable, uniform-looking edge strip. The FLEX notation in the description indicates that the banding is flexible, so it suits straight runs and moderate curves on standard cabinet boxes, shelving, or similar casework where the band follows the panel perimeter.
The 3mm thickness in the SAP description matters during edge preparation because it creates a defined edge profile that engages trimming blades and routers in a stable way, supporting repeatable flush-trim results across a project. The 1-5/16 inch width gives working tolerance on both sides of the panel, so installers can position the banding with minor overhang, then trim back to a straight, clean line without exposing substrate. With 300ft noted in the description, a single roll can serve multiple cabinets or a full set of panels in the same finish run, helping maintain visual consistency because all edges are banded from the same material lot. The Rehau, Inc. brand identification ties this PVC edgebanding to a recognized manufacturer in the edgebanding space, which helps shops align this band with other Rehau edge materials they may already be using.
Rehau PVC edgebanding 302114-093 has a SAP description that lists 1-5/16 inch width, providing coverage that extends past typical panel thickness for clean trimming on both faces.
This Rehau, Inc. PVC edge banding is described as 3mm thick, creating a substantial edge that interacts predictably with standard trimming tools during finishing.
The SAP description specifies 300ft, providing enough continuous Rehau PVC edgebanding for multiple cabinets or a production run without frequent roll changes.
The product is identified as Rehau PVC edgebanding, so it is a PVC edge banding suited to common PVC edging workflows in woodworking shops and cabinet production.
This item is categorized as edgebanding in the Miscellaneous|Edgebanding category, indicating use on exposed panel edges in cabinetry, furniture, or similar woodworking projects.
The SAP description notes FLEX, indicating a flexible form of Rehau PVC edgebanding that follows standard panel edges and moderate curves during application.
Rehau PVC edgebanding 302114-093 from Rehau, Inc. combines a 1-5/16 inch width, 3mm thickness, and 300ft roll length into one edge banding suitable for continuous shop use. As an edgebanding product in the Miscellaneous|Edgebanding category, it finishes exposed panel edges on cabinetry or similar woodworking builds. The FLEX designation in the SAP description points to a flexible strip that tracks normal cabinet lines, helping panels present a finished edge. For runs calling for PVC edge banding with these dimensions, this Rehau PVC edgebanding provides the defined size and roll length needed for planned workflows.
Sold In: 1 Roll