Rehau PVC edgebanding identified as 302114-097 provides a defined edge material for casework and components, which helps create a finished transition between raw board edges and visible surfaces in woodworking projects. The SAP description "1-5/16X3MM FLEX C600202 LAC 300FT" specifies a 1-5/16 inch width and 3mm thickness, so the banding covers standard panel edges while offering a substantial edge profile where a thicker edge detail is desired. The description also notes a 300 foot length, giving a continuous run that supports longer production batches or multiple cabinets without frequent coil changes. The term FLEX in the description identifies a flexible PVC construction, allowing the edgebanding to follow normal cabinet edge runs and typical contours used in shop work. As part of Rehau edge banding from Wurth Baer Supply, this product fits directly into a professional woodworking material set where consistent edge appearance is required.
The stated 1-5/16 inch width on this Rehau PVC edgebanding provides extra coverage beyond many standard panel thicknesses, which allows installers to center the banding on the edge and trim both sides for a flush finish. The 3mm thickness specified in the SAP description gives the edgebanding a solid profile, so trimming and flushing operations can create a defined edge line along cabinet doors, drawer fronts, and casework. The 300 foot roll length listed in the description supports extended machine runs on edgebanders, enabling shops to process long sequences of parts without frequent material changeovers or interruptions during edging workflows.
This Rehau PVC edgebanding, classified in the Edge Banding product class and Edgebanding category, is suited to applications where exposed panel edges need a finished material layer, such as cabinet boxes, shelving edges, and similar casework components. The 1-5/16 inch width described in the SAP details allows it to cover the full edge of panels used in many woodworking projects while leaving workable overhang for trimming tools. With a 3mm thickness, the edge banding can be applied where a more substantial edge is preferred, such as on doors or drawer fronts that are frequently handled in daily use. The FLEX designation in the description signals that the PVC construction is intended to bend along normal linear or gently contoured cabinet edges found in typical shop layouts and installations.
The 1-5/16 inch width and 3mm thickness defined in the SAP description give installers predictable dimensions, which helps in setting edgebanding machines and trimming equipment for repeatable results part after part. Because the edgebanding is described as FLEX PVC, it can be guided along common edge paths on panels, supporting smooth application during standard woodworking workflows. The 300 foot length noted in the description allows continuous feeding through edgebanding equipment, which supports consistent glue line formation and uninterrupted production on runs of cabinets or fixtures. The specific identifiers 302114-097 and C600202 LAC connect the material to a defined Rehau configuration, important when a shop is matching previous work or specifying the same edge detail across different projects. As a product supplied by Wurth Baer Supply in the Edge Banding class, this edgebanding aligns with professional woodworking material sets where edge consistency and repeatable sizing are central to layout and machining plans.
Rehau PVC edgebanding 302114-097 has a SAP description listing 1-5/16 inch width and 3mm thickness, which supports applications needing generous edge coverage and a thicker edge profile on cabinet or casework parts.
This Rehau PVC edgebanding is described with a 300 foot length, giving shops an extended run of material that supports longer edgebander setups and multiple cabinet components from a single roll.
The term FLEX in the SAP description indicates a flexible PVC construction, so the edgebanding follows typical cabinet and casework edges during application in standard woodworking operations.
The 302114-097 edgebanding is listed under the Miscellaneous|Edgebanding category and Edge Banding product class, identifying it as an edge material for finishing exposed panel edges.
The manufacturer part number 302114-097 ties this PVC edgebanding to a specific Rehau configuration, which helps maintain consistent edge appearance when repeating or extending existing work.
This Rehau PVC edgebanding is supplied through Wurth Baer Supply, a specialty wholesale distributor to the woodworking industry, aligning it with professional cabinet and casework material selections.
This Rehau PVC edgebanding 302114-097 from Wurth Baer Supply combines a 1-5/16 inch width, 3mm thickness, FLEX PVC construction, and 300 foot length, giving shops a defined, repeatable edge material for cabinet and casework runs. Using these specified dimensions and identifiers helps align edgebanding setup, machining, and finished appearance across both new projects and follow-on work.
Sold In: 1 Roll