Rehau PVC edgebanding 302114-140 is a PVC edge banding from Rehau, Inc. that covers and protects exposed panel edges, giving casework and cabinetry a finished look while masking raw core material. This edgebanding belongs to the Edge Banding product class, so it is intended specifically for closing off board edges in woodworking projects where a consistent edge line matters. The 1-5/16 inch width stated in the SAP description fits applications where the edge material must span common panel thicknesses with a margin for trimming after application, helping installers flush the band to the face on both sides. The 3mm thickness described in the SAP data provides a more substantial edge than thin tape-style options, which supports a more robust edge profile along high-traffic cabinet or furniture fronts. The flexible designation in the SAP description indicates the banding is designed to bend around edges, which is useful when running continuous edges along straight cabinet parts that may still need slight adjustment during installation.
This Rehau PVC edge banding is identified with dimensions of 1-5/16 inch by 3mm in the SAP description, giving installers a clear sense of how the band will sit on typical panel edges and how much trim allowance is available. The 3mm thickness means that after bonding and trimming, the band presents a more substantial edge profile, so cutters and trimmers can be set to leave a defined edge rather than a film-thin strip. The 300FT length listed in the description supports continuous runs along multiple cabinets or a full room of casework without frequent material changes, which can simplify layout and cutting plans. The flexible designation indicates the band is intended to bend along the run, supporting steady feed during installation and helping maintain even pressure as the band is worked along the substrate.
This Rehau PVC edgebanding, classified as Edge Banding and described as 1-5/16 inch by 3mm, fits projects that use man-made panel products where edges are otherwise exposed. The width supports covering the full thickness of typical cabinetry or furniture panels with room left over for trimming, which aligns well with casework and fixture building. The 3mm thickness referenced in the product description is suited for visible edges on cabinet fronts or shelving where a more substantial band is often preferred for appearance and impact resistance. The 300FT length identified in the SAP description aligns with production-oriented environments or multi-piece jobs where a single run of consistent edging helps maintain uniform appearance from part to part. As an Edge Banding product under the Miscellaneous|Edgebanding category, it plays a role in closing off edges anywhere a panel transitions to a finished face in woodworking applications.
The 1-5/16 inch width documented in the SAP description provides installers a predictable amount of overhang on each side of a typical panel, which supports repeatable trimming passes and consistent reveal from one piece to the next. The 3mm thickness gives enough material for flush trimming tools to track against without cutting through, which can lead to neater results across a run of doors or shelves. Because the product is described as flexible, it is suited to being fed along longer straight edges, maintaining even contact with the substrate as pressure is applied, which supports uniform adhesion along the entire edge. The 300FT roll length in the description allows a shop to edge many parts from a single roll, helping maintain the same material and appearance from cabinet to cabinet in a project. The manufacturer part number 302114-140 provides a single reference for reordering the same PVC edgebanding, which supports consistency on repeat jobs or when extending an existing installation that already uses this specific edge banding.
Rehau 302114-140 PVC edgebanding is an Edge Banding product from Rehau, Inc. that covers exposed panel edges, giving cabinetry and furniture a finished transition between board core and visible faces.
Rehau PVC edgebanding 302114-140 has a width of 1-5/16 inch as stated in the SAP description, which provides overhang on typical panel thicknesses for trimming to a clean, flush edge.
This Rehau PVC edge banding is 3mm thick per the SAP description, providing a substantial edge profile suited to visible cabinet fronts and shelving where a more pronounced edge is desired.
The SAP description lists a 300FT length, giving enough Rehau PVC edgebanding 302114-140 for extended runs or multiple cabinet projects from a single roll.
The SAP description notes this PVC edgebanding as flexible, meaning it is designed to bend along panel edges during application, supporting smooth installation along straight cabinet parts.
The manufacturer part number 302114-140 uniquely identifies this Rehau PVC edgebanding, helping shops match existing materials and reorder the same edge banding for future work.
This Rehau PVC edgebanding 302114-140 from Wurth Baer Supply combines a 1-5/16 inch width, 3mm thickness, and 300FT length in a flexible edge banding format that fits cabinet and panel edge finishing. By using this specific Edge Banding product and its defined dimensions, shops can plan cuts, trimming passes, and material usage with confidence that each run will match the last. For projects built around this exact manufacturer part number 302114-140, choosing this Rehau PVC edge banding keeps edge material consistent across current and future work.
Sold In: 1 Roll