Rehau PVC edgebanding 302114-142 is a Rehau PVC edge banding designed as a finishing strip for exposed panel edges, so raw board edges on cabinets or fixtures can be covered with a consistent material. The 1-5/16 inch width stated in the SAP description gives coverage for typical panel thicknesses with trimming allowance, which supports clean flush trimming in the shop. The 3mm thickness described in the SAP text provides a substantial edge profile, giving panels a solid visual edge that holds up well in everyday use. The product class listed as Edge Banding defines its role as a dedicated edging material, so it fits straightforwardly into standard edgebanding workflows. The SAP description also notes FLEX, indicating a flexible PVC construction that conforms to normal edge contours, which helps during application around straight runs and gentle curves on casework projects.
The 1-5/16 inch width in the SAP description gives this PVC edge banding enough coverage to span standard panel thickness while allowing a small overhang, which then trims back cleanly for a flush edge. The 3mm thickness specified for this edgebanding builds a strong edge profile, supporting a defined radius or profile cut during finishing operations. The FLEX notation in the SAP description indicates that the material is flexible PVC, which helps it seat tightly along straight edges during application and maintain contact while adhesive cures. As an Edge Banding product class, this strip is intended to be applied lengthwise along panel edges, which aligns with edgebander or manual banding workflows used in cabinet and fixture production.
The Category value Miscellaneous|Edgebanding places this Rehau PVC edgebanding 302114-142 squarely in edge-finishing tasks for woodworking projects, which suits cabinet boxes, shelves, and casework panels where exposed core needs to be covered. The 1-5/16 inch width from the SAP description works well for panels that fall within that coverage range, giving shops a single size that handles those thicknesses without needing multiple widths for similar jobs. With a 3mm thickness clearly stated, this edge banding builds a thicker edge line than thin tape, which is useful when a more substantial edge appearance is part of the design intent on doors, tops, or verticals. The FLEX detail in the SAP text points to a flexible PVC construction, which supports application along long straight runs on cabinets and fixtures without kinking, letting operators maintain steady feed through edgebanding equipment.
The Manufacturer Part # 302114-142 gives installers and fabricators a precise identifier, which matters when matching replacement edgebanding to existing millwork or reordering the same material for follow-up phases. The product class Edge Banding clarifies that this item is dedicated to edge treatment, so production planning can route it through edge-focused stations rather than treating it as a general laminate, simplifying setup and throughput. The Rehau, Inc. brand link ties this PVC edgebanding to a recognized edging line, helping shops keep material consistent across different panel batches when specifications call out Rehau PVC edging. The SAP description note of FLEX combined with the 3mm thickness means the strip bends with normal handling yet still forms a solid edge, which supports smooth feeding into edgebanding machinery and provides a sturdy finished edge that aligns well with adjacent panels.
Rehau 302114-142 is a PVC edge banding classified under Edge Banding, so it is used specifically to cover and finish exposed panel edges in woodworking projects.
This PVC edgebanding is listed in the SAP description as 1-5/16X3MM, providing a 1-5/16 inch width and 3mm thickness for edge coverage and a solid edge profile.
The FLEX notation in the SAP description indicates a flexible PVC construction, which helps the edgebanding conform along panel edges and feed smoothly through standard edging processes.
This PVC edge banding is branded by Rehau, Inc., linking it to Rehau edging lines so shops can match project specs that call for Rehau materials.
The 3mm thickness stated in the SAP description creates a pronounced edge profile, allowing defined trimming and shaping where a thicker visual edge is needed on panels.
The Manufacturer Part # 302114-142 provides an exact reference, helping buyers and shops align orders, drawings, and replacements to the same Rehau PVC edgebanding.
The Rehau PVC edgebanding 302114-142 pairs a 1-5/16 inch width with 3mm thickness and FLEX construction, giving woodworking shops a defined edge material for covering panel edges. With its Edge Banding classification and precise Manufacturer Part # 302114-142, this PVC strip fits cleanly into project specs, shop lists, and replacement needs where a Rehau PVC edging is called out. Add this edgebanding to your next run when you need a flexible 3mm PVC edge solution sized for 1-5/16 inch coverage on cabinet and casework panels.
Sold In: 1 Roll