Rehau PVC edgebanding 302114-353 is a PVC edge banding designed to finish and protect exposed panel edges. The 1-5/16 inch width covers standard panel thicknesses while allowing slight overhang for flush trimming, so installers can create straight, uniform edges on cabinets and casework. The 3mm thickness provides a substantial edge profile that stands up to normal shop handling while giving a solid, finished look along door and panel fronts. The flexible construction noted as FLEX lets the banding follow mild curves and panel tolerances, which supports consistent application across longer runs. The C700201 and EMB LAC identifiers define the specific design and finish family for matching to coordinated components on a project. Supplied in a 300FT length, this product supports longer production runs or multiple jobs from one coil, helping reduce changeover time during edge-banding work.
This Rehau PVC edge banding uses a 1-5/16 inch width, giving installers enough material to center on the panel edge and still have trim allowance on both sides for a flush result. The 3mm thickness offers a solid feel at the edge while remaining workable on standard edgebanding machines for bonding, trimming, and scraping steps. FLEX behavior supports feeding through typical edgebanding equipment without excessive stiffness, which can help maintain consistent pressure and tracking. The 300FT coil format supports continuous runs along cabinet sides, shelves, and tall panels, so operators can process sequences of parts without frequent material changes, improving throughput on repetitive work.
This Rehau PVC edgebanding, identified by manufacturer part number 302114-353, fits projects that call for PVC edge banding on panel-based construction. The 1-5/16 inch width aligns with panel edges where a modest overhang is preferred for post-trimming, which suits standard cabinet sides and vertical partitions. At 3mm thick, it provides a defined edge that works well on doors, drawer fronts, and casework where a more pronounced edge is desired. The FLEX designation supports use on straight runs and on edges with mild curvature or panel tolerances, helping maintain consistent contact along the glue line. With a 300FT length, this product serves shops running multiple similar parts, such as kitchen cabinet lines, office furniture components, or fixture panels, where long, uninterrupted edging runs are part of the daily workload.
The 1-5/16 inch by 3mm format gives installers a predictable geometry that pairs with common machine settings, which streamlines setup for repeated jobs using the same edge size. PVC material behavior supports clean trimming and scraping operations, helping operators dial in cutters for smooth transitions between the banding and panel faces. FLEX performance aids in maintaining edge contact as parts travel through the edgebander, which supports even adhesion along the full length of doors and panels. The specific identifiers C700201 and EMB LAC define the design and finish variant, allowing shops to match this edge to the same coded material across a project line. The 300FT coil length supports batch processing of matched parts, which can reduce part-to-part variation since the same material run is used throughout a job sequence.
Rehau PVC edgebanding 302114-353 uses a 1-5/16 inch width, giving enough overhang for trimming while fully covering typical panel edges for a clean finished line.
Rehau PVC edgebanding 302114-353 at 3mm thick creates a more substantial edge profile, providing a solid feel and pronounced visual edge on doors and casework parts.
Rehau PVC edgebanding 302114-353 marked FLEX is formulated to flex with mild curves and panel tolerances, supporting smoother application through edgebanding equipment.
Rehau PVC edgebanding 302114-353 in a 300FT length lets operators run long sequences of parts before changing coils, supporting continuous workflow on larger jobs.
Rehau part number 302114-353 identifies this specific PVC edgebanding variant, tying its size, material, and design to matching components in a project line.
Rehau PVC edgebanding 302114-353 uses C700201 and EMB LAC identifiers, which define its design and finish family for coordinating with related panel materials.
This Rehau PVC edgebanding 302114-353 combines a 1-5/16 inch width, 3mm thickness, and FLEX behavior to support precise edge finishing on panel-based construction. The 300FT coil length suits production environments running repeated parts. For projects matching the C700201 and EMB LAC identifiers, this edge banding provides a defined way to finish exposed edges while supporting consistent machine setup and throughput across cabinet, furniture, or fixture work.
Sold In: 1 Roll