Rehau PVC edgebanding 302114-355 is a PVC edge banding from Rehau, Inc. that provides a defined edge treatment for qualifying board material in woodworking projects. The 1-5/16 inch width described in the SAP description covers typical panel thicknesses so the installer can trim it back to a consistent, finished edge. The 3mm thickness in the SAP description creates a substantial edge profile that stands out visually compared to thinner edges, which supports a more deliberate design line along cabinet and furniture edges. The FLEX designation in the SAP description indicates a flexible PVC construction that follows panel perimeters, letting the installer wrap edges along straight runs or gentle curves without switching products. The 300FT length in the SAP description supplies a continuous run that supports longer installations with fewer joints, which helps maintain a more uniform edge appearance across multiple panels on the same job.
The 1-5/16 inch width noted in the SAP description gives extra material above and below typical substrate thickness, so trimming tools can remove overhang while leaving a straight, square edge. The 3mm thickness in the SAP description changes how the edge meets adjacent surfaces, giving a measurable build that helps align with design targets for thicker edge lines on cabinets, shelves, or architectural panels. The FLEX reference in the SAP description ties to an edgebanding that can be worked along the length of a board without resisting minor variations, so the installer can seat the band firmly before trimming. The 300FT length described in the SAP description supports staging longer runs at the bench, allowing the installer to set up feeding and cutting routines without repeatedly stopping to change material.
The product is classified by Wurth Baer Supply as Edge Banding within the Miscellaneous|Edgebanding category, placing Rehau PVC Edgebanding, 302114-355 directly in the workflow of finishing exposed board edges in woodworking environments. The PVC material referenced in the product name positions this edgebanding for applications where a synthetic edge is preferred on board edges rather than leaving raw core exposed. The 1-5/16 inch width stated in the SAP description lets the installer apply this banding on common panel thicknesses in cabinet and fixture work, with enough overhang for trimming passes that leave a tight edge. The 3mm thickness reported in the SAP description gives the finished edge a more substantial look that pairs well with designs calling for a noticeable border around doors, drawer fronts, or shelving. The Rehau, Inc. brand association in the product data connects the product to a named manufacturer, which matters on repeat projects where spec consistency across multiple jobs is important.
The FLEX designation in the SAP description identifies this as a flexible PVC edgebanding, which means the installer can follow board edges without fighting stiffness, improving contact during bonding for a more uniform line. The 300FT length in the SAP description supports continuity because long stretches of cabinet or fixture components can be edged from one roll, helping keep color and surface characteristics consistent from part to part within that length. The 3mm thickness from the SAP description influences tool setup by defining how far trimming tools work from the board face, which helps maintain the same edge reveal across multiple pieces. The 1-5/16 inch width in the SAP description affects how the banding sits on the board before trimming, giving sufficient margin that supports accurate alignment along the panel face. The Edge Banding product class identified in the data clarifies the role of this item in the assembly, focusing its use on covering and protecting the raw edges of qualifying board materials.
Rehau PVC Edgebanding 302114-355 has a SAP description showing 1-5/16 inch width, which provides trim allowance to flush back to a clean, straight edge on typical panel thicknesses.
The SAP description lists this edgebanding at 3mm thick, giving a more substantial edge profile that supports designs calling for a noticeable border on cabinet parts.
The FLEX term in the SAP description indicates a flexible PVC construction, helping the banding follow board edges and maintain contact along straight runs or gentle curves.
The SAP description specifies 300FT length, which supports edging multiple panels or longer runs on a project from a single roll segment.
This item is classified as Edge Banding in the Miscellaneous|Edgebanding category, aligning it with tasks focused on finishing exposed board edges.
The product data lists Rehau, Inc. as the brand, which identifies the manufacturing source for repeat use on future woodworking projects.
Rehau PVC Edgebanding, 302114-355 pairs a 1-5/16 inch width with 3mm thickness, as stated in the SAP description, giving installers trim margin and a pronounced edge line. The FLEX flexible PVC designation and 300FT length described in the SAP data support continuous edging runs across multiple cabinet or fixture components. For woodworking workflows that rely on a consistent manufacturer source, the Rehau, Inc. branding and Edge Banding classification position this product as a focused option for covering exposed board edges on qualifying projects.
Sold In: 1 Roll