Rehau PVC edgebanding 302114-366 is a Rehau PVC edge banding that finishes exposed edges on panels so you can close out raw cores with a consistent look. The FO 1196-58 Purple Dye color gives you a defined purple tone that matches designs calling for that specific shade, so finished components read as intentional instead of patched. The 1-5/16 inch width covers common panel thicknesses with room to trim, which helps installers hide slight panel variances along cabinet or fixture runs. The 3mm thickness builds a noticeable front edge, adding visual weight at the front of shelves or doors where a thin strip would disappear. The 300 FLX designation gives you a long run in a single product identity, which supports repeatable edge appearance from part to part across a project. Sold by Wurth Baer Supply, it fits directly into woodworking shop workflows.
The 1-5/16 inch width on Rehau PVC edgebanding, 302114-366, gives installers extra coverage beyond standard panel thickness so trimming operations can remove any overhang while still leaving full face coverage. The 3mm thickness means the banding presents a substantial edge that works well with common trimming and profiling tools used on PVC, supporting a consistent edge reveal from part to part. Because this product is categorized as PVC edge banding, it is suited to workflows built around machining PVC rather than thin wood veneer, which can streamline tool choices in a busy woodworking shop. The FO 1196-58 Purple Dye color runs consistently through the banding identity, helping edges stay visually aligned along long cabinet or fixture runs after installation.
The Rehau PVC edgebanding, 302114-366, sits in the edge banding product class, so it slots directly into woodworking applications that call for PVC edge treatment on panels. The FO 1196-58 Purple Dye color lets shops build cabinets, fixtures, or other panel-based elements that rely on a controlled purple tone at the edge, so visible fronts and sides tie into the same design story. With its 1-5/16 inch width, this banding works well on panels where you want a small margin for trimming without exposing the core, which supports tight visual lines along doors, drawer fronts, or shelving. The 3mm thickness adds a defined band at the front edge, giving finished parts a more substantial appearance in installations where the edge becomes a design feature rather than fading into the face.
The 1-5/16 inch by 3mm size of Rehau PVC edgebanding, 302114-366, offers enough material for trimming tools to work without cutting into the panel surface, which helps reduce rework from accidental panel damage. The PVC edge banding construction is suited to established machining processes such as routing and flushing PVC, which supports repeatable results when you run multiple parts in sequence. The FO 1196-58 Purple Dye designation signals a controlled color, so when you edge multiple components in one project the appearance stays consistent from piece to piece. The 300 FLX reference gives a clear length classification within this product identity, which supports planning longer runs where color and material behavior need to remain uniform over many linear feet.
The 302114-366 part number identifies this specific Rehau PVC edgebanding, which matters when matching written specifications or repeating a past project that called for this exact item.
The 1-5/16 inch width provides extra coverage beyond typical panel thickness, giving room to trim flush while still keeping the substrate fully covered along the edge.
The FO 1196-58 Purple Dye color provides a defined purple tone, so cabinet and fixture edges maintain a consistent appearance wherever this edgebanding is used across a project.
The 3mm thickness creates a more substantial front edge, supporting a stronger visual band and giving trimming tools enough material to work cleanly.
The PVC material aligns with machining setups designed for PVC edge banding, allowing routing and trimming processes that suit cabinet and fixture production.
The 300 FLX reference identifies this edgebanding length classification within the product, helping plan longer runs where appearance and material behavior stay consistent.
The Rehau PVC edgebanding, 302114-366, combines FO 1196-58 Purple Dye color with a 1-5/16 inch by 3mm size, giving shops a defined purple edge and workable dimensions for trimming. The PVC edge banding construction supports established routing and flushing processes in woodworking environments, helping parts move cleanly from machining to installation. Sourced through Wurth Baer Supply, this specific manufacturer part number lets you repeat projects or follow specifications that call out Rehau 302114-366 by ID. Put it into your next cabinet, fixture, or panel-based build where a consistent purple edge and predictable machining behavior matter.
Sold In: 1 Roll