Rehau PVC edgebanding 302114-376 is a PVC edge banding product from Rehau, Inc. that covers and protects exposed panel edges, so cabinet and furniture projects present a finished look and reduce exposed substrate on working jobs. The SAP description states 1-5/16X3MM FLEX C500154 EMB LAC 300FT, which identifies a 1-5/16 inch wide, 3mm thick flexible PVC strip that can follow typical straight or gently curved edges without fighting the material during application. The 3mm thickness creates a substantial edge profile that helps panels stand up to normal handling at cabinet fronts and work surfaces. The 300FT length noted in the description provides a continuous run suitable for multiple cabinets or larger production runs, helping reduce splice points along visible edges.
The 1-5/16 inch width specified in the SAP description gives installers extra material beyond the panel face, so they can align the banding quickly and rely on standard trimming methods to finish the edges. The 3mm thickness described for this PVC edge banding creates a defined edge that works well with typical trimmers and routers, so cleanup around corners stays controlled. The FLEX note in the description points to a flexible PVC construction that helps the banding seat against the substrate along the full run, so adhesive contact stays more uniform during production work.
This product is identified as Rehau PVC Edgebanding, 302114-376, in the Edgebanding category, so it fits woodworking and casework projects where exposed panel edges need a PVC finish. The SAP description 1-5/16X3MM FLEX C500154 EMB LAC 300FT ties it to a 1-5/16 inch wide, 3mm thick flexible strip, giving enough coverage for standard panel constructions in cabinet boxes, shelving, and similar assemblies. As an edge banding product, it caps raw board edges so the substrate is covered and the edge reads as a uniform surface in normal residential or commercial cabinetry.
The 300FT length noted in the SAP description supports runs across multiple cabinets or larger pieces, so shops can edge several components from a single part number during a build cycle. The flexible PVC nature referenced in the description helps the banding conform to typical straight and mild curved edges found in casework, which supports steady feed rates during application. Because this product is classified under Edge Banding and identified by Manufacturer Part # 302114-376, it fits into shop workflows where consistent, repeatable edge material is required from job to job.
The 1-5/16 inch width in the 1-5/16X3MM FLEX C500154 EMB LAC 300FT description gives margin on both sides of common panel thicknesses, so installers can position the strip without precision edge alignment and rely instead on trimming for the final finish. The 3mm thickness provides enough material mass at the edge to support a sturdy feel while still working with conventional trimmers, so edges stay solid through typical use. The FLEX reference points to flexibility in the PVC banding, which helps reduce tension at corners and along longer runs, contributing to smoother results when edging multiple panels in sequence.
The 300FT length recorded in the SAP description reduces the number of changeovers during production, which helps keep edge color and profile consistent across all parts in a project. Being clearly identified as Rehau PVC Edgebanding with Manufacturer Part # 302114-376 allows purchasing and production teams to call out the same material on drawings and job lists, supporting consistent edge appearance and dimensions on repeat jobs. Its place in the Edgebanding product class anchors it as a dedicated solution for covering raw panel edges in woodworking and casework environments.
Rehau PVC Edgebanding 302114-376 is a PVC edge banding product, so it provides a plastic edge cover that protects and finishes exposed panel cores on cabinets and furniture.
Rehau PVC Edgebanding 302114-376 is described as 1-5/16X3MM, meaning it is 1-5/16 inch wide and 3mm thick, giving installers coverage for trimming while creating a substantial edge profile.
Rehau PVC Edgebanding 302114-376 has 300FT noted in the SAP description, providing a long run that supports edging multiple components or larger projects from a single part number.
The FLEX wording in 1-5/16X3MM FLEX C500154 EMB LAC 300FT indicates a flexible PVC construction, which helps the edgebanding conform to panel edges during application.
Rehau PVC Edgebanding 302114-376 is listed in the Edgebanding category and Edge Banding product class, aligning it with cabinet, furniture, and casework edge finishing.
The Manufacturer Part # 302114-376 defines this exact Rehau PVC edgebanding, so shops can reorder the same width, thickness, and style for consistent future projects.
Rehau PVC Edgebanding 302114-376 from Rehau, Inc. provides a 1-5/16 inch wide, 3mm thick flexible PVC edge banding in a 300FT length, as described in 1-5/16X3MM FLEX C500154 EMB LAC 300FT. That combination supports cabinet and furniture edge coverage, trimming margin, and longer production runs using a single identified Manufacturer Part # 302114-376 in the Edgebanding category.
Sold In: 1 Roll