Rehau PVC edgebanding 302114-378 provides a PVC edge banding solution for closing off exposed panel edges, so cut boards gain a finished edge that stands up better in everyday woodworking environments. The 1-5/16 inch width in the SAP description gives coverage for typical panel thicknesses with some overhang for trimming, which supports a consistent finish along the length of the edge. The 3mm thickness creates a substantial edge profile, so corners feel solid and visually defined when the banding is applied and trimmed. The flexible designation in the SAP description indicates the material is suited to standard edgebanding workflows, which helps the banding follow normal panel runs without fighting the operator. The C100137 EMB LAC reference in the SAP description identifies an embossed lacquer surface specification, so the face of the edging presents a consistent decorative finish that aligns with matching board or design targets in the job.
The 1-5/16 inch width in the SAP description gives installers extra material beyond many panel thicknesses, so the banding can be centered, bonded, then trimmed flush for a consistent line along the edge. The 3mm thickness specified in the SAP description creates a proud edge that responds well to standard trimming and scraping operations, which helps hold a uniform radius or crisp corner once machining is complete. The PVC material called out in the product name and SAP description works with common edgebanding equipment and adhesives designed for PVC, so operators can run this product within known temperature and feed ranges on their existing machines.
This Rehau PVC edge banding is identified in the product data as edgebanding within the woodworking-focused assortment at Wurth Baer Supply, so it fits naturally into cabinet, casework, and furniture panel work where PVC edging is specified. The 1-5/16 inch width stated in the SAP description aligns with many common substrate thicknesses used in these assemblies, which lets fabricators standardize on this size for a large share of verticals, horizontals, and shelves. The 3mm thickness in the SAP description yields an edge profile often chosen for visible fronts and door edges, so designers can rely on this banding when they want a more substantial look than thin tape. The C100137 EMB LAC notation in the SAP description identifies a particular embossed lacquer surface, which helps projects that call for a specific decorative finish stay visually consistent across multiple batches and component runs.
The Manufacturer Part # 302114-378 ties directly to the SAP description 1-5/16X3MM FLEX C100137 EMB LAC 300FT, so production planners can connect purchasing, inventory, and cut lists to the same precise edging spec, reducing mix-ups between similar colors or profiles. The flexible reference in the SAP description describes this PVC edgebanding as suited to normal handling and coiling in a 300FT length, which supports longer continuous runs on edgebanders without frequent material changes. The 3mm thickness gives enough material for trimming heads and scraping blades to work without tearing through, so finished edges keep their intended profile after machining and light cleanup. The embossed lacquer surface signaled by EMB LAC in the SAP description provides a defined face layer, which helps edges present a consistent sheen and texture when installed alongside matching surfaces in cabinets, fixtures, or other built-ins.
Rehau PVC edgebanding 302114-378 is identified in the SAP description as 1-5/16 inch wide by 3mm thick, so tooling and trimming setups can be configured to those dimensions.
Rehau PVC edgebanding 302114-378 is PVC edge banding, so it works with equipment, adhesives, and processes designed around PVC edging in woodworking shops.
Rehau PVC edgebanding 302114-378 is described in the SAP data as 300FT, so it supports extended runs before changing material.
Rehau PVC edgebanding 302114-378 carries the C100137 EMB LAC code in the SAP description, indicating a specific embossed lacquer surface and decorative specification.
Rehau PVC edgebanding 302114-378 is labeled FLEX in the SAP description, indicating a flexible PVC construction suited to typical edgebanding workflows.
Rehau PVC edgebanding 302114-378 uses a 3mm thickness, providing a substantial edge profile that supports clean trimming and a pronounced finished edge.
Rehau PVC edgebanding 302114-378 combines a 1-5/16 inch width, 3mm thickness, and FLEX PVC construction with an embossed lacquer surface identified as C100137 EMB LAC, so it supports consistent, repeatable edge results on panel-based woodworking projects.
Sold In: 1 Roll