Rehau PVC edgebanding 302114-500 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cut boards present a uniform banded edge instead of raw substrate. The 1-5/16 inch width stated in the description covers typical panel thickness and slight overhang, so edges can be trimmed and flushed clean after bonding. The 3mm thickness in the description provides a substantial edge profile compared to thin tape, so finished parts have a defined edge line that stands up to handling in normal shop environments. The description notes a flex C200138 designation, which identifies this as a flexible PVC formulation, so the strip conforms around standard straight cabinet and furniture edges during application without fighting the material. The 300ft length in the description supplies a continuous roll, so production runs and larger jobs proceed with fewer changeovers between lengths.
The 1-5/16 inch stated width gives installers enough material beyond panel thickness to trim both faces clean after bonding, so edge trimmers or machining stations can leave a flush, square result without exposing core material. The 3mm thickness described provides a deeper edge profile, so routed corners and light edge easing retain a solid PVC band rather than cutting through to substrate. The SAP description specifies a 300ft length, so edgebanders or manual stations can stay set up for longer runs of doors, drawer fronts, and shelves while maintaining the same appearance along every piece in that sequence.
This PVC edge banding, identified in the SAP description as 1-5/16 x 3mm, suits applications where panels approach that thickness and require a substantial 3mm edge. That width allows installers to run parts through an edgebander or manual setup with enough overhang for trimming, so both the face and back of a panel can be cleaned up to a straight line without leaving PVC short of the surface. The 3mm dimension offers more edge material for profiling operations than thinner banding, so light corner breaking and minor sanding still keep a consistent PVC face along cabinet doors, furniture components, and casework parts subject to everyday handling.
The flex C200138 notation in the SAP description marks this as a flexible PVC edgebanding, so when it is guided along straight edges the strip tracks with the panel without resisting normal machine feed. That flexibility helps maintain adhesive contact and alignment along the edge, which supports achieving a straight glue line and consistent reveal before trimming. The 300ft roll length called out in the description allows a run of many cabinet parts or repeated jobs to draw from one continuous roll, so color and texture from this Rehau PVC edge banding remain consistent through that sequence. Fewer roll changes help keep setup conditions stable, which supports uniform edge appearance when parts are grouped in the same installation.
Rehau PVC edgebanding 302114-500 is a PVC edge banding from Rehau, Inc., so it is used to cover and finish exposed edges of panels in cabinet and furniture construction.
The 1-5/16 x 3mm size in the SAP description indicates width and thickness, so it suits panels near that thickness and provides a substantial 3mm edge profile for trimming and light profiling.
The flex C200138 designation in the description identifies a flexible PVC variant, so the banding follows standard straight panel edges during application without excessive stiffness.
The 300ft length noted in the description provides a long roll, so installers can run extended sequences of parts with consistent material before changing rolls.
This PVC edge banding is identified with the Rehau, Inc. brand, so it aligns with Rehau manufacturing and can match other Rehau materials used in a shop.
The manufacturer part number 302114-500 uniquely identifies this specific Rehau PVC edgebanding, so ordering with this code targets the same size and flex designation.
The SAP description defining this Rehau PVC edgebanding as 1-5/16 x 3mm flex C200138 in a 300ft length, combined with the Rehau, Inc. branding and part number 302114-500, gives installers clear sizing and identification. Those details support choosing this edge banding when a 3mm PVC profile, generous width for trimming, flexible behavior along straight edges, and a long continuous roll match cabinet or furniture production needs.
Sold In: 1 Roll