Rehau PVC edgebanding 302114-518 is a PVC edge banding designed for finishing exposed edges on woodworking projects. The 1-5/16 inch width covers typical panel thickness while giving a bit of overhang for trimming, so edges finish tight and uniform on cabinets or casework. The 3mm thickness builds a solid edge profile that stands out clearly from thinner tapes, which helps when machining corners or easing edges after bonding. This edgebanding is described as FLEX, indicating a flexible PVC construction that follows slight curves along panels, which supports smoother application around cabinet sides and shelves. The C500023 LAC designation identifies a specific color or decor series, so matching across multiple runs can be controlled consistently on the job. Supplied in a 300 ft length, it supports longer runs on shop jobs without frequent changeover, which helps maintain consistent setup and workflow.
This Rehau PVC edge banding in 1-5/16 inch by 3mm format gives installers a predictable amount of overhang to trim, supporting consistent setup on edge-banding equipment. The 3mm thickness works well where a more substantial edge detail is desired, which can be important on cabinet doors and drawer fronts that see frequent handling. The flexible PVC noted by FLEX works with standard edge-banding processes for PVC materials, aligning with common shop machinery and techniques. With a 300 ft roll length identified in the description, shops can run multiple components from a single roll, which supports batch processing and reduces downtime from changing rolls mid-job.
Rehau PVC edgebanding 302114-518 serves as an edge finishing solution on panel-based construction such as cabinets, furniture, or casework where PVC edge banding is specified. The 1-5/16 inch width suits many panel builds by covering the full thickness while providing a margin for trimming, which is helpful when sizing after bonding. The 3mm thickness gives an edge profile that reads more substantial than thin tapes, suiting applications where the edge is a visible design element. Because it is described as FLEX, the PVC material accommodates slight curvature or panel irregularities, which supports consistent bonding along vertical cabinet sides, shelves, and tall panels. The C500023 LAC designation ties this edgebanding to a defined finish identity, which matters when matching edges across doors, drawer fronts, and panels within a single job or on repeat work for the same client.
The manufacturer part number 302114-518 provides a clear reference when specifying or reordering, which simplifies communication between shop, purchasing, and supplier. The 1-5/16 by 3mm dimension in the SAP description gives an exact size reference, helping shops align tooling, trimming, and profiling steps to this specific edgeband. FLEX in the product description highlights that this is a flexible PVC product, supporting consistent feed and wrap behavior in automated or manual PVC edgebanding setups. The C500023 LAC identifier works as a finish or decor code, so once a project is approved with this look, future jobs can repeat the same edge appearance by calling out the same part number. The 300 ft length supports planning for production quantities, allowing estimators to relate edge lineal footage to roll requirements for more predictable material usage and less interruption during runs.
Rehau PVC edgebanding 302114-518 is described as 1-5/16 inch wide by 3mm thick, so it covers typical panel edges with extra material for trimming and creates a substantial edge profile.
Rehau PVC edgebanding 302114-518 is labeled FLEX, indicating a flexible PVC construction that follows gentle curves or small panel variations for smoother, more consistent edge coverage.
Rehau PVC edgebanding 302114-518 is listed at 300 ft in length, supporting longer production runs and reducing the frequency of roll changes during edge-banding operations.
Rehau PVC edgebanding 302114-518 uses the C500023 LAC identifier to denote a specific finish series, which helps maintain consistent edge appearance across multiple jobs.
This 3mm thick PVC edgebanding works where a more pronounced edge detail is desired, such as cabinet doors, drawer fronts, and casework edges that see frequent handling.
The 1-5/16 inch width on this Rehau edgeband covers common panel thicknesses with some overhang, allowing trimming equipment to produce flush, clean finished edges.
Rehau PVC edgebanding 302114-518 combines a 1-5/16 inch by 3mm format, FLEX construction, and a defined C500023 LAC finish series to support consistent cabinet and furniture edge work. With its 300 ft length and clearly identified part number, it fits production environments that value repeatable sizing, color continuity, and straightforward reordering. For shops standardizing on PVC edgebanding in this size range, this part provides a clearly specified option for planning and executing edge-banding runs across multiple panel-based projects.
Sold In: 1 Roll