Rehau PVC Edgebanding 302124-006 For Clean Edges

Rehau PVC edgebanding 302124-006 is a PVC edge banding solution that covers and finishes exposed panel edges, so cut board edges look consistent across a run of cabinets or casework. The 15/16 inch width gives coverage over standard panel thickness with a bit of overhang for trimming, which helps produce a straight, flush edge after machining. The 3mm thickness provides a substantial edge profile, giving more material at the edge compared to thin tape-style banding, which matters when parts see regular contact in use. This edgebanding is supplied as a continuous 300 ft length, allowing longer runs and multiple projects to be handled from the same coil without frequent changeover. The FLEX C200008 LAC designation identifies this specific flexible PVC formulation and finish variant within the Rehau, Inc. line, which helps match it to existing jobs or drawings that specify this part number.

Key Rehau PVC Edgebanding Details For Projects

• The 15/16 inch width provides edge coverage across typical panel thickness with material left for final trim, helping achieve a neat, flush edge without exposing the substrate on cabinets or furniture parts.
• The 3mm thickness builds a more substantial edge, giving a defined profile at doors, drawer fronts, and shelves where parts are handled regularly, and supporting a more robust edge compared to very thin banding.
• The 300 ft roll length allows extended edgebanding runs from a single coil, reducing changeovers between parts and supporting consistent setup when processing multiple components in the same job.
• The Rehau, Inc. brand and manufacturer part 302124-006 clearly identify this edgebanding, which supports accurate reordering when a specific edge detail and appearance have already been established on prior work.
• The SAP description 15/16X3MM FLEX C200008 LAC 300FT defines the size and type in one reference, helping align shop documentation, purchasing, and production settings around the same PVC edge banding specification.

Size And Format Details For Installation Setup

The 15/16X3MM dimension on this Rehau PVC edgebanding defines both width and thickness, so edgebander guides and trimming heads can be set to suit the material before running parts. The 15/16 inch width gives room for slight lateral positioning variation at the machine while still leaving enough overhang for clean trimming passes, which supports consistent results across multiple operators or shifts. The 3mm thickness defines how much material projects past the face of the panel prior to trimming, guiding cutter and scraper setup on edgebanding equipment. Supplied as a 300 ft coil, this format supports continuous feeding through standard edge banding machines over longer production sequences.

How This Rehau Edgebanding Fits Into Shop Workflows

Where Rehau PVC Edgebanding 302124-006 Is Used

This Rehau PVC edgebanding, identified by SAP description 15/16X3MM FLEX C200008 LAC 300FT, is suited to jobs that call for a 3mm PVC edge on panels, doors, or similar components. The 15/16 inch width is matched to common panel builds where the edge band slightly overshoots the board before trimming, which helps produce a uniform edge line on cabinet runs. Because it is categorized as edge banding and edgebanding, it fits naturally into woodworking and cabinet production environments where exposed panel edges need to be covered. The 300 ft length supports both smaller production batches and longer runs that repeat the same specification, so shops can keep one reference on hand for a series of related projects.

Why Dimensions And Part Number Matter For Results

The defined 15/16X3MM size on this Rehau, Inc. PVC edgebanding gives installers and machine operators a clear target when setting pressure rollers, trimmers, and scrapers, which supports repeatable edges across multiple panels. The 3mm thickness influences the visual edge profile and how much material remains after finishing passes, so choosing this thickness helps maintain the same look when matching existing work that already uses 3mm PVC. The FLEX C200008 LAC designation and manufacturer part 302124-006 tie this material to a specific formulation and appearance, which matters when a drawing or specification calls out that exact part, helping keep replacement pieces visually aligned with earlier batches. The 300 ft coil format contributes to consistent results by allowing a full job to run from the same lot, which supports uniform behavior on the edgebander throughout the process.

Common Questions About Rehau 302124-006 Edgebanding

Select Rehau 302124-006 Edgebanding For Defined Edges

This Rehau PVC edgebanding 302124-006 from Wurth Baer Supply combines a 15/16 inch width, 3mm thickness, and 300 ft length to support repeatable panel edge work. Adding this specific part number to the shop standard helps keep future jobs aligned to the same established edge detail.