Rehau PVC edgebanding is PVC edge banding from Rehau, Inc. that finishes raw board edges so panels present a consistent edge, giving cabinet and furniture parts a unified look across a project. The product name Rehau PVC Edgebanding, 302124-123 identifies it as Manufacturer Part # 302124-123, which helps match this edgebanding to drawings or cut lists that specify this exact part. The product class Edge Banding defines its role as an edging material, so it sits over exposed substrate edges to cover cut faces. The SAP description 15/16X3MM FLX C600571 LAC 300FT specifies a 15/16 inch width that covers common 3/4 inch panels with overhang for trimming, helping installers flush-cut without exposing the core. The 3mm thickness builds a substantial edge that stands out visually on cabinet and furniture components. The 300FT length in the SAP description indicates a longer run capacity so larger jobs use fewer roll changes.
The SAP description 15/16X3MM FLX C600571 LAC 300FT specifies a 15/16 inch wide Rehau PVC edgebanding, giving coverage that exceeds a typical 3/4 inch panel and allows trimming both sides to a flush finish. The 3mm thickness noted in the SAP description creates a relatively thick edging layer, which changes the tactile feel at the edge and supports designs that call for a bold edge profile. The flexible PVC construction identified in the description by FLX works with edgebanding equipment designed for PVC, so shops can match this product to standard PVC-capable machinery workflows. The 300FT length allows continuous edging over longer cabinet and furniture component runs, reducing stops and restarts and helping maintain consistent feed settings.
The product class Edge Banding defines this Rehau PVC Edgebanding, 302124-123 as an edging material for covering exposed panel edges in cabinet, furniture, or interior fixture production. The 15/16 inch width from the SAP description 15/16X3MM FLX C600571 LAC 300FT suits work where substrates are close to 3/4 inch thick, letting fabricators center the band and trim back for a clean, square appearance. The 3mm thickness provides a robust edge layer, which plays well in applications that expect frequent contact at the edge, such as cabinet doors and drawer fronts. The FLX indicator in the SAP description identifies a flexible PVC construction, supporting use on straight edges and modestly curved sections that fall within typical flexible edgebanding capabilities. The C600571 LAC references in the description tie this Rehau PVC edgebanding to a consistent decor code, which matters on jobs where drawings or specifications call out this exact visual match.
The Manufacturer Part # 302124-123 gives shops a precise identifier for Rehau PVC edgebanding, reducing mix-ups when repeating jobs or matching prior installations. The combination of 15/16 inch width and 3mm thickness from the SAP description 15/16X3MM FLX C600571 LAC 300FT allows edgebander operators to set up for a known overhang and trimming allowance, which supports repeatable machining parameters from part to part. The flexible PVC construction signaled by FLX helps the band conform smoothly along panel edges under standard edgebanding pressure, promoting a consistent glue line appearance where PVC is used. The 300FT length described in the SAP text extends the run capacity on a single roll, helping maintain the same feed, temperature, and pressure settings over longer batches before a roll change. For shops sourcing through Wurth Baer Supply, this defined Rehau PVC edgebanding specification fits into ordering routines that rely on exact part numbers and decor codes for repeat production.
Rehau PVC Edgebanding, 302124-123 is PVC edge banding in the Edge Banding product class, so it is used to cover and finish exposed panel edges in cabinet and furniture work.
Rehau PVC Edgebanding, 302124-123 has a SAP description of 15/16X3MM FLX C600571 LAC 300FT, indicating a 15/16 inch width and 3mm thickness for substantial edge coverage.
The 15/16 inch width from the SAP description covers typical 3/4 inch panels with extra overhang, allowing trimming from both faces to achieve a flush, clean finished edge.
The FLX reference in the SAP description 15/16X3MM FLX C600571 LAC 300FT indicates a flexible PVC material, supporting application along straight edges and gentle curves.
The SAP description lists 300FT, so Rehau PVC Edgebanding, 302124-123 provides 300 feet of edging, supporting longer production runs before changing rolls.
The C600571 reference in the SAP description identifies a specific decor code, helping align this PVC edge banding with panels and drawings that specify C600571.
Rehau PVC edgebanding with SAP description 15/16X3MM FLX C600571 LAC 300FT provides a defined 15/16 inch by 3mm flexible PVC edge banding format, so panel edges use a known width, thickness, and decor code. The Manufacturer Part # 302124-123 clearly identifies this product for ordering and repeat jobs, which supports consistent sourcing through Wurth Baer Supply. For cabinet and furniture shops that specify PVC edging by dimension and decor reference, this Rehau PVC edgebanding offers a straightforward way to match edge material to drawings and maintain uniform appearance across projects.
Sold In: 1 Roll