Rehau PVC edgebanding gives cabinet and woodworking projects a finished edge where raw panel cores would otherwise show, so visible edges present a consistent appearance in the completed run. The product is identified as Rehau, Inc. edge banding in the edgebanding category, which positions it for use anywhere a PVC band is needed on board or panel edges. The 302124-195 manufacturer part number ties everything back to a specific Rehau SKU, so repeat orders match the same material. The SAP description notes 15/16 x 3mm C600001 LAC 300FT, which defines a 15/16 inch wide, 3 mm thick PVC band supplied in a 300 foot length, giving enough continuous material for longer cabinet or fixture jobs. Wurth Baer Supply lists this as WBSC - 1432 - RU302124-195, so purchasing and inventory reference stay consistent from job to job.
The 15/16 inch width called out in the SAP description gives coverage beyond common panel thickness, so installers can align the band, apply adhesive by their chosen method, and then trim flush for a sharp finished edge. The 3 mm thickness described there delivers a thicker band than thin tape-style edges, so trimmers and routers engage a more solid profile during flush-trimming passes. Because the roll length is specified as 300 feet, shops can run multiple cabinets or case pieces from a single coil, reducing mid-run material changes while banding edges. The product class listing as edge banding makes its role clear in the workflow, so it slots directly into established edgebanding, trimming, and finishing steps.
The category listing as edgebanding positions the Rehau 302124-195 product for use on exposed panel edges in cabinet, furniture, and general woodworking applications where a PVC edge is desired. The 15/16 inch width from the SAP description suits panels that finish near three-quarters of an inch or similar, leaving an overhang that can be trimmed clean at both faces. With a 3 mm thickness specified, this banding supports edges where a more pronounced, solid-looking front is preferred over very thin edge tape, such as on door fronts or cabinet ends. The 300 foot roll length described in the SAP data serves shops running batches of parts, supporting continuous processing on edge banders or manual stations across several components. The Rehau branding in the product name ties this material to a recognized PVC edgebanding line, which helps maintain visual and performance consistency across multiple jobs.
The 15/16 x 3 mm size specified in the SAP description gives installers a predictable band cross-section, so edge banders, trimmers, and hand tools can be set up once and run multiple parts without constant adjustment. That consistent width helps jigs, fences, and pressure adjustments stay aligned from panel to panel, reducing the likelihood of exposed core at an edge. The 3 mm thickness provides enough material for clean trimming passes without chatter, supporting repeatable edges when using standard edgebanding cutters or hand trimmers. With 300 feet identified in the description, a single roll can feed a sequence of cabinets or fixtures with the same material, which helps keep color and thickness uniform across an entire install. The manufacturer part number 302124-195 lets shops log this specific configuration in job notes, so future replacement pieces can draw from the same Rehau PVC edgebanding reference for a consistent match.
Rehau 302124-195 is PVC edgebanding in the edge banding product class, so it is used to cover and finish exposed panel edges in cabinet and woodworking projects.
The SAP description lists the edgebanding as 15/16 x 3 mm, giving a 15/16 inch wide, 3 mm thick band for covering and trimming panel edges.
The SAP description specifies a 300 foot length, so one roll supports extended edgebanding runs across multiple cabinets or casework components.
This edgebanding uses manufacturer part number 302124-195 and the WBSC - 1432 - RU302124-195 web description, helping shops repeat the exact same material on later jobs.
The product name lists Rehau, Inc. as the brand, so buyers can align this PVC edgebanding with other Rehau edge banding materials they already use.
The 3 mm thickness described in the SAP data provides a substantial edge profile, giving trimmers and routers enough material to cut a clean, consistent finished edge.
Rehau PVC edgebanding identified as 302124-195 combines a 15/16 inch width, 3 mm thickness, and 300 foot roll length to support steady edge finishing on cabinet and woodworking projects. The defined C600001 LAC configuration and Rehau, Inc. branding tie this banding to a specific, repeatable material choice. For shops routing and trimming exposed panel edges, this edge banding from Wurth Baer Supply provides a clearly specified option to align with existing edgebanding and finishing workflows.
Sold In: 1 Roll