Rehau PVC edgebanding 302124-200 is a PVC edge banding product from Rehau, Inc. that covers and finishes raw panel edges, so cabinet and woodworking projects get a consistent, professional-looking perimeter instead of exposed substrate. The product class is Edge Banding, which means it is designed specifically as a finishing strip for panels rather than a structural component, letting installers focus it on visual and edge-protection duties. The SAP description states 15/16X3MM FLEX C400810 EMB LAC 300FT, identifying a 15/16 inch wide, 3mm thick flexible PVC strip, so it can match common board thickness while giving a substantial edge profile in use. The 300FT length noted in the description provides extended continuous material for runs of cabinets or casework, helping longer jobs proceed with fewer interruptions and fewer material changeovers during edgebanding operations.
The SAP description 15/16X3MM FLEX C400810 EMB LAC 300FT specifies a 15/16 inch wide, 3mm thick flexible PVC strip, so during installation there is enough overhang to align the band to the panel and then trim it flush without starving the edge. The 3mm thickness listed in the description gives a heavier edge profile compared with thin tape-style materials, which supports more defined edge shaping when using trimming and profiling tools. The 300FT notation indicates a long run on one coil, which lets installers feed edgebanders or manual setups for multiple cabinets or casework pieces while maintaining the same material reference, simplifying edge-matching across a full job.
The product class Edge Banding and brand Rehau, Inc. place this item in the woodworking and cabinet finishing space, so it suits cabinet boxes, shelving, and similar panel-based constructions where raw edges need covering. The SAP description 15/16X3MM shows that its 15/16 inch width aligns well with common sheet goods in cabinet work, letting installers apply it to vertical sides, horizontal tops, and shelving edges without excessive waste or overhang. The 3mm thickness indicated in the SAP description offers a solid edge detail for areas that see frequent contact, helping front edges of shelving, cabinet sides, or work surfaces gain a more substantial, defined profile. The FLEX designation in the description means the PVC material is described as flexible, so it works along straight runs and moderate curves found in many custom cabinet and furniture projects, supporting a consistent edge treatment across varied geometries.
The manufacturer part number 302124-200 clearly identifies this specific Rehau PVC Edgebanding, allowing shops to reorder the same edge profile and finish, which supports repeat jobs and field repairs that must match earlier work. The SAP description string C400810 EMB LAC associates the edgebanding with a defined Rehau code, so once a shop sets that code in its job specs, future projects can reference the same visual for consistent results across installations. The 300FT length noted in the description helps production environments maintain the same coil through a sequence of case parts, reducing visual breaks that can occur when switching between shorter strips. The Edge Banding product class and PVC identification signal a dedicated edging material, which integrates with common edgebanding tools and workflows so operators can dial in settings once for this thickness and run multiple parts with predictable trimming behavior.
Rehau 302124-200 is a PVC edge banding product classified as Edge Banding, so it is used to cover and finish exposed panel edges on cabinets and other woodworking projects.
The SAP description states 15/16X3MM, meaning the edgebanding is 15/16 inch wide and 3mm thick, giving a substantial edge that suits common cabinet panel thicknesses.
The SAP description lists 300FT, indicating a 300-foot length that supports longer cabinet runs and multiple case parts without frequent coil changes during production.
The term FLEX in the SAP description indicates a flexible PVC construction, allowing the edge banding to follow straight edges and gentle curves on cabinet and furniture components.
The 3mm thickness described in the SAP text provides a heavier edge profile, which supports defined trimming and shaping on cabinet fronts and shelf edges.
The manufacturer part number 302124-200 uniquely identifies this specific Rehau PVC edgebanding, simplifying reorders and helping shops match finish and profile across repeat projects.
The Rehau PVC Edgebanding 302124-200 from Rehau, Inc., identified by SAP description 15/16X3MM FLEX C400810 EMB LAC 300FT, delivers a 15/16 inch wide, 3mm thick flexible PVC strip for edge finishing. That combination of width, thickness, and FLEX construction supports cabinet and woodworking applications that need a defined, consistent edge around panel-based components. Using this specific part number lets shops standardize on one edge profile and finish code for repeat jobs, so projects maintain continuity from run to run. Add this Rehau PVC edgebanding to your material list when a 15/16 by 3mm flexible edge banding format matches your panel dimensions and finish standards.
Sold In: 1 Roll