Rehau PVC Edgebanding 302124-204 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cut boards match the project design. The 15/16 inch width covers standard panel thickness with a bit of overhang, giving room to trim flush for a straight, professional line. The 3mm thickness builds a solid edge profile, which helps protect vulnerable panel edges in everyday shop or jobsite use. The FLEX C200837 EMB LAC designation identifies a flexible embossed lacquer surface, so the edging presents a defined texture and sheen where a project calls for it. A 300ft length suits production runs or multiple cabinets from one roll, reducing changeouts during cutting and banding. As an edge banding in the Rehau PVC family, this product fits best where synthetic edgebanding is preferred over exposed substrate.
This edge banding is specified as 15/16X3MM FLEX C200837 EMB LAC 300FT, so installers know they are working with a 15/16 inch wide and 3mm thick PVC product in a flexible embossed lacquer series. That dimension set lets the banding cover the edge of typical panel stock with enough excess for trimming, while the consistent 3mm thickness helps machining and adjustment stay predictable from part to part. The manufacturer part number 302124-204 and the WBSC - 1432 - RU302124-204 web description act as clear identifiers when matching this exact edge on drawings, cut lists, or supplier orders.
This PVC edge banding is classified under Edge Banding in the Edgebanding category, so it is intended for finishing exposed edges on panel-based components. The 15/16 inch width covers common panel thicknesses used in cabinet boxes, shelving, and similar assemblies, giving room to trim for a sharp line along fronts and sides. At 3mm thick, the banding builds a defined edge that suits areas where hands regularly contact the panel edge, such as doors or drawer fronts. The FLEX C200837 EMB LAC description signals a flexible embossed lacquered surface within this Rehau line, aligning the visible edge with panels that share the same texture and finish family.
The 300ft roll length supports extended production runs in a shop environment, connecting well with workflows that cut and band multiple parts in a single setup. With manufacturer part number 302124-204 and the WBSC - 1432 - RU302124-204 reference, shops can tie this specific edging to project specifications and repeat it on future jobs. As a Rehau PVC Edgebanding 302124-204 product, it serves as a defined choice when a PVC edge solution is preferred for the job.
The combination of 15/16 inch width and 3mm thickness gives a predictable amount of material to work with during trimming and finishing, which helps reduce variation along long edges and across multiple parts in a run. Because the product is described as FLEX C200837 EMB LAC, installers can expect a flexible PVC material with an embossed lacquer surface from this specific Rehau series, aiding visual continuity wherever that texture is specified. The Edge Banding product class makes the role of this material clear in the hardware and panel workflow: it closes off substrate edges so the finished piece presents a continuous surface.
The 300ft length ties directly to how often a roll needs to be changed during edging operations, which matters when scheduling machine time and labor in the shop. Clear labeling as Rehau PVC edgebanding with manufacturer part number 302124-204 supports accurate pull from inventory and helps match documentation, so the same edge treatment follows a project from sample through final installation.
Rehau PVC Edgebanding 302124-204 is a PVC edge banding from Rehau, Inc. used to finish exposed panel edges so the substrate is covered and the project presents a continuous surface.
The 15/16 inch width and 3mm thickness show how much PVC covers the panel edge, giving extra width for trimming and a solid edge profile along doors, drawers, or shelves.
The FLEX C200837 EMB LAC designation identifies a flexible PVC edging with an embossed lacquer surface, aligning the visible edge with panels specified in that textured finish series.
The 300ft length allows longer production runs and multiple components to be edged from one roll, reducing changeovers during cutting and banding operations in the shop.
Being in the Edge Banding product class means this material is intended specifically for covering exposed panel edges within cabinetry, casework, and similar panel-based assemblies.
Part number 302124-204 uniquely identifies this Rehau PVC edgebanding, helping buyers match the same 15/16x3mm FLEX C200837 EMB LAC edge on drawings, orders, and repeat projects.
Rehau PVC Edgebanding 302124-204 brings a 15/16 inch by 3mm PVC edge in the FLEX C200837 EMB LAC series, suited for covering exposed panel edges with a defined embossed lacquer surface. The 300ft roll length supports multi-part cabinet or casework runs from a single product choice. With its clear identification as Edge Banding and manufacturer part number 302124-204, this edging fits workflows that depend on repeatable, labeled materials across quoting, cutting, and finishing.
Sold In: 1 Roll