Rehau PVC edgebanding 302124-205 is a PVC edge banding strip that covers and protects raw panel edges on woodworking projects, giving panels a finished, uniform look. The Rehau, Inc. brand and Manufacturer Part # 302124-205 identify this specific edgebanding for repeat orders and consistent results from job to job. As an Edge Banding product in the edgebanding category, it is intended for edge treatment on sheet goods where a durable edge detail is needed to complement the main surface.
The SAP description "15/16X3MM FLEX C500221 EMB LAC 300FT" defines the working format: the 15/16-inch width and 3mm thickness provide coverage and edge mass suited to common panel constructions, while the flex designation supports working around straight runs that may need minor contour following. The 300ft length supports longer production runs or multiple small jobs from a single roll, helping maintain consistency across cabinets, casework, or other assemblies that share the same edge detail.
The 15/16-inch width stated in the SAP description gives a working margin past common panel faces, so installers can align the strip quickly and trim back to a flush edge without exposing the core material. The 3mm thickness pairs with this width to create an edge profile that can be shaped and finished after bonding, supporting clean transitions at corners and ends. Because the product is identified as FLEX C500221 PVC edgebanding, the strip is suited to being guided along straight or gently changing edges during installation. The 300ft roll length minimizes changeovers once an edgebander or manual setup is running, supporting a steady workflow across cabinet runs or repeated parts that share the same edge profile.
As an Edge Banding product in the edgebanding category, Rehau PVC edgebanding 302124-205 is designed for finishing the exposed edges of panels used in cabinets, furniture, and other casework. The 15/16-inch width referenced in the SAP description allows coverage of typical panel thicknesses used in these applications, so the edge band can be centered quickly and then trimmed flush to both faces. The 3mm thickness supports a more pronounced edge that visually matches many modern panel constructions, helping the edge read as part of the design rather than a thin tape. Because the product is identified as FLEX C500221, the PVC material supports standard edgebanding workflows, such as feeding through an edgebander or guided hand application along linear edges, so shops can integrate it into existing processes.
The 300ft length in the SAP description means one roll serves multiple cabinets or furniture pieces that share the same edge detail, so the visual appearance stays consistent across an entire installation. With Manufacturer Part # 302124-205 and Web Description "WBSC - 1432 - RU302124-205," shops can match documentation, job tickets, or reorders to the exact edgebanding used on prior work. This supports future repairs or add-on pieces that need to align with earlier projects, helping maintain a uniform edge appearance when panels from different batches are placed side by side.
The defined 15/16X3MM sizing from the SAP description provides a known cross-section, which helps dial in trimming and finishing setups for repeatable cuts along the edge. Once equipment is set to this combination of width and thickness, operators can run parts with consistent trimming performance across the full 300ft roll. The FLEX C500221 designation indicates a flexible PVC edge banding configuration, which supports smooth feeding behavior and reduces resistance as the strip moves through typical edgebanding paths, contributing to cleaner glue lines and more uniform pressure across the edge.
The Rehau, Inc. branding and Manufacturer Part # 302124-205 give shops a clear reference when documenting materials used on a project, supporting consistent material selection whenever the same edge appearance is required again. Being part of the Edge Banding product class within the edgebanding category also signals its role in the overall panel construction workflow, so it can be specified alongside sheet goods and other components as part of a coordinated materials list. The 300ft roll length further supports production planning because a single roll can cover multiple jobs that share the same edge specification.
Rehau PVC edgebanding 302124-205 is an Edge Banding product in the edgebanding category, so it is used to finish and protect exposed panel edges in woodworking and cabinet projects.
The 15/16 x 3mm sizing from the SAP description defines the width and thickness, providing coverage over common panel edges and enough material for trimming to a clean, solid-looking profile.
The FLEX C500221 designation in the SAP description indicates a flexible PVC edgebanding configuration, which supports smoother handling and feeding along straight or gently changing panel edges during application.
The 300ft length in the SAP description allows longer continuous edgebanding runs and multiple related jobs from one roll, helping maintain consistent edge appearance across cabinets or casework.
Manufacturer Part # 302124-205 clearly identifies this specific Rehau PVC edgebanding, so shops can match material records and reorders to the exact edge material used on previous work.
As Edge Banding, Rehau PVC edgebanding 302124-205 covers and finishes raw panel edges, supporting a uniform appearance and protecting exposed core edges in cabinets and furniture.
Rehau PVC edgebanding 302124-205 combines a defined 15/16X3MM FLEX C500221 profile with a 300ft roll length, giving woodworking shops a repeatable edge solution for cabinets, furniture, and casework. The clearly stated dimensions in the SAP description help align trimming setups and edge details to planned panel thicknesses, while the Edge Banding product class positions this PVC strip as a standard component in panel construction workflows. Choosing this Rehau, Inc. edgebanding by its Manufacturer Part # 302124-205 supports consistent edge appearance across current and future projects that share the same specification.
Sold In: 1 Roll