Rehau PVC edgebanding identified as 302124-207 is PVC edge banding that finishes exposed board edges on cabinets, furniture, and fixtures, so raw core is covered and edges present as a continuous, uniform surface during installation and use. The SAP description states 15/16 x 3mm, so this edgebanding is sized to cover standard panel thicknesses while giving a small overhang for trimming, which supports tight, flush edges after machining. The description also notes FLEX, indicating a flexible PVC construction that follows normal cabinet and casework contours, helping installers run consistent edges along straight runs and gentle curves. The reference C400772 EMB LAC in the description identifies a specific embossed and lacquered design, so the banding delivers a defined texture and surface treatment that align visually with matching board or laminate designs in production work.
The SAP description notes 15/16 x 3mm dimensions, so this Rehau PVC edgebanding is sized to cover typical panel thicknesses used in cabinets and fixtures, providing enough width to hide the core while still trimming quickly to a flush edge. The 3mm thickness gives a substantial edge profile that machines cleanly on standard edgebanders, supporting consistent glue-line and radius details during production runs. The FLEX designation indicates a flexible PVC design that feeds smoothly into edge-application equipment, helping maintain steady tracking along the edge and reducing the chance of stiffness-related misalignment. With manufacturer part number 302124-207 clearly defined, shops can set up, label, and repeat runs with the same edgebanding specification whenever matching existing installations.
The product is classified as edge banding and identified as Rehau PVC edgebanding, so it is intended for finishing exposed edges on cabinets, furniture, and general woodworking panels where PVC banding is specified. The 15/16-inch width in the SAP description means it covers standard panel thicknesses often used in cabinetry and casework, so edges are fully concealed before trimming. A 3mm thickness produces a pronounced edge profile often selected in commercial and residential work, supporting durable-feeling edges once machined. The FLEX designation shows that this banding uses a flexible PVC formulation, so it suits straight runs and gentle curves commonly found in carcass edges, shelves, and vertical panels. The C400772 EMB LAC notation defines a specific embossed, lacquered surface design, so it aligns with projects that call for that particular Rehau texture and finish as part of a coordinated surface program.
The clearly stated 15/16 x 3mm sizing gives installers a predictable trim allowance, so edgebanders can be set up for repeat passes without guessing at coverage or overhang. The Rehau PVC edgebanding material works within typical thermoplastic edge-application workflows, so existing glue application, pressure, and trimming settings for comparable PVC edges form a logical starting point for production. The FLEX description signals that the strip is designed to bend along panel edges without excessive spring-back, helping maintain contact through the pressure zone on edgebanding machines. The C400772 EMB LAC code ties the edge directly to a defined embossed and lacquered design, allowing shops to specify this exact look when aligning doors, drawer fronts, and case edges under a single Rehau visual reference. The manufacturer part number 302124-207 further supports reordering the same banding for future phases or repairs where continuity of edge appearance matters.
Rehau 302124-207 is PVC edgebanding classified as edge banding, so it is used to finish and protect exposed board edges on cabinets, furniture, and other woodworking panels.
The SAP description lists this Rehau PVC edgebanding as 15/16 x 3mm, providing coverage for standard panel thicknesses and a 3mm edge profile suitable for trimming and shaping.
The FLEX description indicates a flexible PVC construction, so the edgebanding follows normal cabinet and furniture edge lines, supporting smoother feeding and tracking on suitable edgebanding equipment.
C400772 EMB LAC designates a specific embossed and lacquered design for this Rehau edge banding, so the texture and surface finish match that defined Rehau visual specification.
This Rehau PVC edgebanding is 3mm thick, giving a substantial edge profile that machines well and presents a pronounced visual edge on cabinet and furniture components.
The 15/16 inch width on Rehau 302124-207 covers typical panel thicknesses while providing trim allowance, so installers can achieve flush, clean edges after machining.
Rehau PVC edgebanding with manufacturer part number 302124-207 combines 15/16 x 3mm dimensions, FLEX construction, and the C400772 EMB LAC design, so it provides a defined size, behavior, and appearance for edge work. These verified details support specifying this exact banding when a project calls for 3mm PVC edge treatment that visually aligns with the corresponding Rehau embossed and lacquered design. For cabinet shops and woodworking professionals standardizing on a particular Rehau look, this identification helps keep future runs and replacements visually consistent across doors, drawer fronts, and case edges.
Sold In: 1 Roll