Rehau PVC edgebanding in model 302124-208 is PVC edge banding that covers and protects exposed panel edges, creating a defined transition from the face material to the edge so panels present a consistent finish around the perimeter. The 15/16 inch width spans common panel thicknesses with a margin, giving room to trim flush on both faces so the edge can be finished cleanly without exposing substrate. The 3mm thickness creates a substantial edge profile, supporting a solid visual band at the front of cabinets or casework where the edge is seen and contacted most. The flexible designation in the 15/16X3MM FLEX description indicates the strip conforms around straight runs and gentle changes of direction, supporting use on typical cabinet carcasses and shelving layouts. The C600001 EMB LAC reference in the description identifies a specific decor and lacquered surface combination, keeping color and sheen consistent across all edges finished with this edgebanding.
The 15/16X3MM FLEX wording in the SAP description defines the installed band size, which matters when setting up trimming tools so cutters reference the extra width correctly and produce a flush edge without cutting into the panel face. The 15/16 inch width leaves margin on typical panel constructions, which helps during glue-up because the band can be positioned slightly proud and then trimmed back rather than aligned precisely to the panel edge. The 3mm thickness establishes how the edge will feel and look, influencing router or trimmer settings so the finished profile reads as a deliberate design detail along door and drawer fronts. The 300FT note in the description identifies an extended length format that supports continuous feeding through edgebanding equipment across many parts in a batch.
The Product Class of Edge Banding and the Category of Edgebanding identify this Rehau PVC edgebanding as trim for exposed panel edges in woodworking and cabinet projects, so it fits into workflows that finish raw board edges before assembly or installation. The PVC material referenced in the product name creates a defined barrier at the edge, which is useful on casework, shelving, and similar components where the core needs a protective and visually finished edge. The 15/16 inch width described in the SAP text gives coverage suited to common panel thickness ranges, so installers can apply it to cabinet sides, tops, bottoms, and fixed shelves while still trimming to a tight, uniform reveal on both faces. With a 3mm thickness, the band forms a noticeable front profile on door and drawer fronts, supporting designs that rely on a bold edge line rather than a thin veneer appearance.
The combination of 15/16 inch width and 3mm thickness in the 15/16X3MM FLEX description affects setup and repeatability, because tooling can be dialed in once for this profile and then used across many identical parts without changing cutters or guides. The C600001 EMB LAC reference in the SAP description indicates a specific embossed and lacquered surface, so when the same code is ordered again, the edge appearance stays aligned with previous work, supporting consistent touch-up or expansion projects. The PVC construction called out in the product name works well where a defined synthetic edge is preferred, helping shops deliver uniform color and surface from one component to the next in a run. The 300FT length noted in the description supports production runs where many parts share the same edge treatment, which reduces changeovers during edging and helps maintain consistent feed behavior throughout the job.
The 15/16X3MM size means the band is 15/16 inch wide and 3mm thick, giving extra width for trimming and a substantial edge profile on cabinet parts and panels.
The FLEX notation indicates a flexible PVC band, so it follows straight runs and gentle changes in direction, helping it adapt to typical cabinet and shelving layouts.
Rehau PVC edgebanding covers exposed panel edges, providing a finished PVC surface that protects the panel core and establishes a consistent visual edge line.
The C600001 EMB LAC code identifies a specific embossed and lacquered decor, helping shops match edge color and surface when repeating or extending prior work.
The 300FT length allows long, continuous runs through edgebanding equipment, so many cabinet parts can be edged from one roll during batch production.
The 302124-208 part number identifies this specific Rehau PVC edgebanding configuration, helping buyers reorder the same size and decor for consistent results.
This Rehau PVC edgebanding, defined by the 15/16X3MM FLEX C600001 EMB LAC 300FT description and 302124-208 part number, provides a PVC edge solution sized and finished for woodworking and cabinet panel edges. The 15/16 inch width and 3mm thickness establish the working profile, while the C600001 EMB LAC decor maintains consistent appearance across multiple projects. For shops standardizing on a PVC edge with this specific dimension set and finish code, choosing this edgebanding supports repeatable setups and matching results from job to job.
Sold In: 1 Roll