Rehau PVC edgebanding 302124-210 is a PVC edge banding from Rehau, Inc. that finishes and protects exposed panel edges on cabinet and woodworking projects. The product is identified as edge banding, so it covers raw substrate edges to create a defined transition between panel faces and the edge. The SAP description states 15/16 x 3mm, so this banding is sized for panel edges that need roughly 1-inch wide coverage with a 3mm thick edge, which helps create a substantial profile on casework and shelving. The description lists FLEX, indicating a flexible construction that allows the banding to follow straight runs and gentle curves more easily during application. The same description notes C600257 EMB LAC, identifying a specific Rehau embossing and lacquer combination so the edge surface is pre-finished to coordinate with matching decorative materials in that code family.
The SAP description specifies a 15/16-inch width, giving enough coverage for common panel thicknesses while still trimming cleanly to the face, so fabricators can process standard cabinet parts without changing edge-banding setups. The 3mm thickness is also specified, which creates a more substantial edge profile useful when a pronounced edge detail is desired on doors, drawer fronts, or shelving. The designation C600257 EMB LAC in the description references a specific embossed and lacquered finish, so the surface is prepared at the factory to coordinate with materials keyed to that code, helping maintain a consistent visual field across panels and edges.
The product is categorized as edge banding in the Miscellaneous|Edgebanding class, so it is suited to cabinet, furniture, and general woodworking applications where panel edges need finishing. The 15/16-inch width works with panel constructions that fall near 3/4 inch, so shops building frameless cabinets or casework can rely on this banding size to cover the edge with a small overhang for trimming. The 3mm thickness stated in the SAP description creates a thicker edge profile than thin-tape solutions, so it can be used on exposed edges such as doors, drawer fronts, or shelves where a more substantial edge presence is desired. The FLEX note in the description indicates flexibility, making it appropriate for straight edges and gentle curves common on cabinet runs and work surfaces.
The SAP description identifies the product as 15/16 x 3mm PVC, so shops can set up edge-banding equipment specifically for that width and thickness, supporting repeatable trimming passes and consistent flush results on production runs. The 300FT length reference means a single roll supports extended runs, which allows fabricators to process multiple components in the same setup without stopping to change materials, maintaining alignment and color continuity across a job. The C600257 EMB LAC designation ties the banding to a defined Rehau emboss and lacquer system, so once a shop chooses that code for a project, the same edge banding can be used across parts to keep the surface texture and sheen consistent along all exposed edges.
Rehau 302124-210 PVC edgebanding uses PVC construction, which supports typical edge-banding machining, trimming, and routing in cabinet and woodworking shops.
Rehau 302124-210 is specified as 15/16 x 3mm, providing coverage for standard panel thicknesses with a 3mm thick edge profile for a more substantial finished look.
Rehau 302124-210 is listed as 300FT, giving shops a long continuous length that supports multiple cabinet or casework runs in the same material code.
Rehau 302124-210 carries the C600257 EMB LAC designation, identifying a specific embossed and lacquered surface that coordinates with materials sharing that code.
Rehau 302124-210 has a 3mm thickness, creating a thicker, more defined edge that works well on exposed cabinet doors, drawer fronts, and shelving.
Rehau 302124-210 PVC edgebanding is categorized as edge banding for cabinet and woodworking projects, finishing exposed panel edges in casework, furniture, and similar applications.
Rehau PVC edgebanding 302124-210 provides a 15/16 x 3mm PVC edge banding solution sized for standard cabinet and casework construction. The C600257 EMB LAC designation defines its embossed and lacquered surface, so edges can align visually with materials built around that code. With a 300FT length in one material roll, shops gain the capacity to handle multiple parts and runs of the same finish without changing edge material midstream, supporting consistent, coordinated edges across the project.
Sold In: 1 Roll