Rehau PVC edgebanding 302124-212 provides a defined finished edge for board materials, so cabinet and furniture components present a consistent, professional profile on all exposed sides. The 15/16 inch width covers typical panel thickness with extra tolerance, which helps fully cover the substrate edge and minor alignment variation during processing. The 3mm thickness builds a substantial edge, which supports impact resistance along cabinet fronts, shelves, or casework sides in regular shop and onsite use. The FLEX designation in the description identifies a flexible PVC construction, so the banding can follow straight runs and gentle curves during edgebanding operations. The C600185 EMB LAC reference ties this roll to a specific color and surface series, which helps match this edgebanding to the intended panel or design program on repeat jobs. The 300 foot length in the description supports longer production runs without frequent changeover.
The 15/16 x 3mm sizing in the SAP description sets clear expectations for machine setup, so feed speeds, trimming heads, and scraping tools can be arranged for a 3mm PVC edge on standard panels. The width gives enough margin for slight panel size variation, which supports producing flush edges after trimming without exposing the core. The PVC construction referenced in the product name defines the material type, so temperature and feed choices can be tuned for PVC behavior during edgebanding operations. The FLEX note in the description points to a banding that conforms more easily as it moves through guides and around edges, which supports steady tracking along cabinet sides, shelves, and doors in continuous runs.
This Rehau PVC edgebanding, identified as 302124-212 and classified as edge banding, serves as the finishing edge for cabinet and furniture components that need a PVC edge treatment. The 15/16 inch width and 3mm thickness from the SAP description align with common casework and cabinet door sizes, so boards cut for standard carcasses, partitions, and fronts can receive a substantial edge profile. The FLEX designation in the description supports use on straight cabinet sides as well as mild curves often found in custom shelves or rounded details. The C600185 EMB LAC reference marks a defined appearance category, so the same code can be used whenever matching this edge profile and visual specification across initial installations and future expansions. The 300 foot length indicated in the description suits production environments where repeated parts, such as doors or shelves, run in sequence without frequent roll changes.
The 3mm thickness in the SAP description gives operators a stable amount of PVC to trim and scrape, which supports clean transitions at corners and along door edges without cutting into the substrate. The 15/16 inch width creates a steady overhang on both faces of most standard panels, which helps trimming units remove material evenly and leave a uniform reveal from part to part. The PVC material stated in the product name defines melt and cut characteristics, which supports consistent machining results once equipment is dialed in for PVC. The FLEX notation in the description helps the banding track smoothly through guides, which assists in maintaining edge alignment over long parts such as tall pantry sides or wardrobe panels. The C600185 EMB LAC code links this roll to a specific appearance, which supports repeat orders that maintain the same visual line across replacement components and additional cabinetry runs.
Rehau PVC edgebanding 302124-212 is described as PVC edge banding, which means it uses polyvinyl chloride material suited to standard PVC edgebanding equipment and machining setups.
The 15/16 x 3mm dimensions indicate the edgebanding width and thickness, which set trimming and routing expectations when finishing typical cabinet and furniture panel edges.
The FLEX designation in the SAP description identifies flexible PVC construction, which allows the banding to track along straight runs and gentle curves during cabinet and furniture edge processing.
The C600185 EMB LAC code identifies a specific finish series, which helps keep color and surface character consistent across multiple components and repeat cabinet or furniture runs.
The SAP description specifies 300FT, so this edgebanding roll provides 300 feet of material for extended cabinet or furniture production runs.
Rehau 302124-212 edge banding, with its 15/16 inch width and 3mm thickness, suits cabinet and furniture components that call for a PVC edge treatment with a substantial profile.
Rehau PVC edgebanding 302124-212 combines a 15/16 inch width, 3mm thickness, and FLEX construction with a defined C600185 EMB LAC appearance, so cabinet and furniture runs can share the same PVC edge detail. The 300 foot length in the SAP description supports batch processing where consistent setup across many parts matters. For projects built around this specific color and profile, choosing this Rehau PVC edge banding helps align material, dimensions, and visual specification in one step.
Sold In: 1 Roll