Rehau PVC edgebanding 302124-213 is PVC edge banding that covers exposed panel edges, so raw board edges are hidden and workpieces present a finished look on cabinets and casework. The 15/16 inch width bridges typical panel thicknesses with slight overhang, giving room to trim flush to the surface for a straight, consistent edge line. The 3mm thickness builds a substantial front edge, which helps create a solid visual profile along door and shelf fronts. The flex designation in the SAP description signals a flexible PVC construction, allowing the banding to follow standard cabinet runs and gentle contours without cracking, which supports smooth lines on installed pieces. The 300 foot length noted in the SAP description keeps a large amount of material in one run, supporting longer production stretches and minimizing changeovers during repetitive edging jobs.
The 15/16 inch width referenced in the SAP description gives extra coverage beyond typical board thickness, so there is consistent material to trim on both faces after bonding, which helps achieve clean, flush edges with standard edge trimmers. The 3mm thickness specified for this Rehau PVC edgebanding provides a robust edge build, so trimmers and routers engage solid material rather than a thin film, which can support smoother passes and reduce chatter at the edge. The flexible PVC noted by the flex wording allows the banding to seat against the substrate along its length, which supports even adhesive contact and helps maintain a straight edge line once trimmed. The 300 foot roll length supports setting up a continuous installation workflow across multiple panels without frequent material changes.
This product is classified as edge banding and edgebanding in the product data, so it is designed to cover and finish the exposed edges of panels used in woodworking. The Rehau PVC construction specified in the product name suits panel-based projects where a PVC edge is preferred along cabinet, shelving, or similar casework components. The 15/16 inch width recorded in the SAP description fits common panel thicknesses, so installers can run this banding along cabinet sides, tops, bottoms, and door edges while trimming back to the board faces. The 3mm thickness described in the SAP text makes it suitable where a pronounced front edge is desired, such as on doors and shelves that will be handled regularly, helping the pieces present a substantial edge line. The 300 foot length supports shop environments that process multiple panels in sequence, letting the same Rehau PVC edgebanding run across a full project for consistent edge appearance.
The 15/16 inch by 3mm dimension documented in the SAP description provides both overhang and edge build, which supports predictable trimming and helps maintain uniform reveal from part to part across a run of cabinets. The flex designation tied to this Rehau PVC edgebanding means the material is intended to bend along standard panel edges, so it can follow long cabinet stretches without introducing flat spots, which supports smoother visual lines. As a Rehau PVC edge banding identified by manufacturer part number 302124-213, it gives shops a repeatable specification, helping align future reorders with existing installations when the same edge size and material are required. The 300 foot length listed in the SAP description concentrates substantial footage on one roll, which supports uninterrupted edging on large jobs and helps keep edge color and material consistent throughout the project.
Rehau PVC edgebanding 302124-213 is listed in the SAP description as 15/16 inch wide by 3mm thick, so it covers standard panel edges and provides a substantial edge profile for trimming.
The SAP description states 300FT, so this Rehau PVC edgebanding provides approximately 300 feet per roll, supporting extended edging runs on multiple panels or cabinets in one project.
The product name identifies it as Rehau PVC edgebanding, so the edge banding is made from PVC, providing a PVC edge surface along the panel perimeter in woodworking applications.
The 3mm thickness noted in the SAP description builds a thicker front edge, which creates a more pronounced edge line on doors, shelves, and panels once the banding is trimmed flush.
The flex wording in the SAP description indicates a flexible PVC design, which allows the edgebanding to follow typical cabinet runs and gentle curves, supporting smooth, continuous edge treatment.
This edge banding is identified as Rehau PVC edgebanding with manufacturer part 302124-213, which supports consistent reordering when the same size and material are needed on future projects.
Choose Rehau PVC edgebanding 302124-213 when a 15/16 inch by 3mm flexible PVC edge banding is needed for panel-based woodworking. The documented 300 foot length supports shop runs, and the defined Rehau part number helps align projects around a consistent edge treatment.
Sold In: 1 Roll