Rehau PVC Edgebanding 302124-222 is a PVC edge banding from Rehau, Inc. that covers and protects exposed panel edges, so cabinet and furniture projects gain a clean finished look along the length of each run. The 15/16 inch width gives coverage for typical panel thicknesses with a slight overhang, so trimming operations leave a tight, flush edge on workpieces. A 3mm thickness provides a substantial PVC layer at the edge, so routed or filed corners maintain a solid profile during normal shop handling. The FLEX C600001 designation identifies this as a flexible formulation, so it follows standard cabinet and casework contours without fighting the material during feed. Edgebanding supplied on a 300 foot roll supports longer production runs, so repeated set-ups on the same color and size are reduced in a busy woodworking shop.
The 15/16 x 3mm size of this Rehau PVC edgebanding sets up an installation where the strip slightly exceeds panel thickness, so trimming tools can bring the edge back flush on both faces. The 3mm thickness presents a generous PVC edge for shaping, which helps maintain a defined profile after standard routing and scraping passes. The flexible PVC noted by the FLEX C600001 description works with typical edge banders and hand-fed operations, so installers can guide it along cabinet sides and shelves with consistent pressure. Supplied in a 300 foot roll format, the edgebanding supports continuous feeding through edgebanding machines, which is useful for casework batches sharing the same color reference 302124-222.
This Rehau PVC edgebanding sits in the edgebanding category at Wurth Baer Supply, so it suits panel edge treatment in woodworking environments focused on cabinets and furniture. The 15/16 inch width aligns with many standard panel builds where the core material is slightly under that dimension, so a small overhang can be trimmed away after bonding. A 3mm thickness works well along front-facing edges of casework, providing a noticeable but controlled radius when shaped. The PVC material is appropriate for interior woodworking projects where a consistent, machine-applied edge is needed on shelves, doors, and cabinet sides.
The manufacturer part number 302124-222 identifies this specific color and finish reference within the Rehau line, which helps shops keep edge stock matched to panel faces on repeat work. The FLEX C600001 notation indicates a flexible PVC formulation, so shops running curved or varied-length components can feed this banding across different layouts. A 300 foot roll supports a mix of parts, from tall cabinet sides down to drawer fronts, while keeping all visible edges on the job tied to the same Rehau PVC edgebanding 302124-222 specification.
The defined 15/16 x 3mm dimension on this PVC edgebanding allows edgebanders and trimmers to be set once for that size, which supports consistent, repeatable cuts across multiple panels in a production run. The 3mm thickness gives enough PVC depth for standard edge trimming and light profile work without cutting back into the core, helping operators maintain the same visual line from piece to piece. Because the material is flex-designated as FLEX C600001, feed rollers and guides can maintain pressure along straight and modestly contoured edges, supporting stable glue lines and uniform edge appearance.
The 300 foot roll length provides a single continuous source for many components on the same job, which helps keep color and surface continuity when using the 302124-222 reference. Using a specific Rehau, Inc. part number for this edgebanding also streamlines reordering when the same edge detail is specified across multiple projects. Within Wurth Baer Supply's edgebanding class, this product occupies a defined size and material slot, so it can be integrated into shop routines where PVC edgebanding roll dimensions are part of the standard set-up notes.
Rehau PVC Edgebanding 302124-222 is 15/16 inch wide by 3mm thick, so it covers typical panel edges with extra material for trimming to a flush finished edge.
The FLEX C600001 description identifies a flexible PVC formulation, so the edgebanding feeds more easily on standard machines and follows cabinet edges with steady pressure.
This Rehau PVC edgebanding is supplied as a 300 foot roll, so shops can run multiple cabinet or furniture components in one setup using the same material.
The 3mm thickness on this PVC edge banding provides a solid edge layer, supporting routed profiles and helping edges stand up to normal handling.
The 302124-222 manufacturer part number identifies this specific Rehau PVC edgebanding variant, helping maintain consistent selection across repeat cabinet and furniture projects.
Wurth Baer Supply classifies this Rehau product as edge banding in their edgebanding category, aligning it with other panel edge treatment materials for woodworking shops.
The defined 15/16 x 3mm size, FLEX C600001 flexible PVC material, and 300 foot roll length position Rehau PVC Edgebanding 302124-222 as a practical choice when a consistent edge detail is needed on multiple cabinet or furniture components. The Rehau, Inc. part number 302124-222 keeps this edgebanding tied to a specific reference, which supports repeat work when the same edge treatment is required. For projects where PVC edgebanding roll format, controlled thickness, and reliable panel edge coverage matter, this product from Wurth Baer Supply provides a clearly defined option.
Sold In: 1 Roll