Rehau PVC edgebanding 302124-223 provides a PVC edge banding solution that covers and protects raw panel edges, so cabinet and furniture parts present a finished, uniform look on exposed sides. The edgebanding belongs to the Edge Banding product class, which means it is designed to cap the exposed substrate edge and visually tie it to the surface material across the run of cabinets or fixtures. The 15/16 inch width gives coverage over standard panel thickness with enough tolerance for flushing and trimming, so installers can achieve a tight, consistent reveal along doors, drawer fronts, and casework. The 3mm thickness creates a substantial edge profile that helps define the front of the panel and supports a solid-feeling edge when doors and drawers are handled repeatedly in everyday use.
The 15/16 inch width of this Rehau PVC edge banding gives coverage beyond the panel face, so the installer can trim back to a clean, centered edge without risking chip-out into the surface. The 3mm thickness gives a stable edge that tracks well through standard trimming and scraping steps, which helps maintain a straight line along doors and panels after machining. The 300ft roll length supports longer runs of cabinet or fixture components in one material, which streamlines handling at the edgebander and helps maintain consistent edge appearance from the first part to the last on a job.
This Rehau PVC edgebanding, identified by manufacturer part number 302124-223, fits into cabinet and furniture production wherever exposed panel edges need to match the face material. The 15/16 inch width allows it to cover the edge of typical case sides, shelving, and fronts while leaving enough material to trim for a precise finish. The 3mm thickness creates a visible, defined edge detail that pairs well with doors and drawers designed around thicker edge profiles, which is common in modern cabinetry layouts. Because the roll length is specified at 300ft, a single roll can serve multiple carcasses or room layouts, so the same edge material follows through base units, tall units, and wall cabinets without variance in profile.
The specific combination of 15/16 inch width and 3mm thickness on Rehau 302124-223 gives fabricators a predictable amount of overhang and mass at the edge, which supports repeatable trimming settings from part to part. The FLEX C300361 designation in the SAP description identifies a defined configuration, which supports consistent edge look when matching across separate orders or phased installations. Working from a 300ft roll reduces changeovers at the edgebander, so once feed speed and trimming are dialed in for this PVC banding, the setup can remain stable through a large batch of doors, drawer fronts, and panels. The fact that this edgebanding is classified as Edge Banding in the edgebanding category reinforces its role as a dedicated solution for finishing raw edges in cabinet and furniture builds.
Rehau PVC edgebanding 302124-223 is described as 15/16 inch wide by 3mm thick, giving coverage for typical panel edges and providing enough material for trimming to a clean finished edge.
The Rehau 302124-223 PVC edgebanding is noted at 300ft length, which supports edging many cabinet or furniture components in a single run with one material setup.
Rehau 302124-223 is classified as Edge Banding in the edgebanding category, so it is intended for finishing raw panel edges in cabinet and furniture construction workflows.
This PVC edgebanding is used on exposed panel edges of cabinets and furniture, so case sides, doors, drawer fronts, and shelving present a continuous finished look at the front edge.
The 3mm thickness on this PVC edgebanding builds a substantial edge profile, which supports a solid-feeling front edge on panels and aligns with thicker edge design preferences.
The 15/16 inch width provides slight overhang beyond the panel face, giving trimmers room to cut back to a flush, centered edge without exposing the panel core.
The Rehau, Inc. PVC edgebanding 302124-223 combines a 15/16 inch width, 3mm thickness, and 300ft roll length to support efficient, consistent edging on cabinets and furniture projects. Selecting this Edge Banding part lets shops align multiple components around one defined edge profile, which helps finished installations present a unified look across doors, drawers, and casework.
Sold In: 1 Roll