Rehau PVC edgebanding in model 302124-225 provides a PVC edge banding solution for finishing exposed edges on panel projects. The 15/16 inch width covers standard panel thickness with margin, supporting reliable trimming without exposing the core material during fabrication and use. The 3mm thickness gives a substantial PVC edge profile, which supports consistent machining when flushing edges or profiling corners. The FLEX C600005 EMB LAC designation identifies a specific configuration within the Rehau, Inc. line, helping shops repeat the same visual and dimensional result across multiple jobs. Supplied in a 300FT length, this edgebanding supports longer production runs or multiple smaller projects from a single roll, reducing changeovers on edgebanding stations. As part of the Edge Banding product class in the Edgebanding category, this Rehau PVC option aligns with typical woodworking workflows that require a dedicated edge treatment on casework and similar components.
The 15/16 inch by 3mm format of Rehau PVC edgebanding, model 302124-225, offers dimensional room for standard edge-banding processes on sheet goods. The 15/16 inch width provides coverage beyond common panel thicknesses, so trimmers can remove the excess and still maintain full edge coverage. The 3mm thickness sets a defined edge radius potential when machining, which aids in selecting tooling and pass depth on edgebanders or routers. With these stated dimensions, installers and fabricators can plan feed setups, trimming allowances, and edge finishing steps around a predictable PVC edge profile.
Rehau PVC edgebanding, identified as 302124-225 and classified as Edge Banding, serves woodworking applications that call for a PVC edge treatment on exposed panel sides. The 15/16 inch width supports use on cabinets, shelves, and casework panels where typical board thickness needs full coverage with a slight overhang. The 3mm thickness supports projects that benefit from a more pronounced edge presence, such as higher-use cabinetry or fixtures where the edge line is a visible design detail. The 300FT length per roll suits production environments that run multiple components or full kitchens and commercial jobs from a single material batch.
The FLEX C600005 EMB LAC specification on this Rehau PVC edgebanding defines a particular configuration within the manufacturer part number 302124-225, which supports consistent reordering when a project requires the same look and edge profile later. Because it is PVC edge banding from Rehau, Inc., shops familiar with Rehau PVC behavior can align feed rates and trimming practices to an expected performance range. The 15/16 inch by 3mm size helps standardize tooling setups, since operators can base trimming, sanding, and profiling routines on these repeating dimensions. With a 300FT roll length, shops can schedule sequences of cabinet or panel runs around a continuous supply of the same edge banding, which helps keep edges visually and dimensionally uniform across related work.
Rehau PVC edgebanding 302124-225 is specified as 15/16 inch wide by 3mm thick, which supports full edge coverage with trim allowance and a substantial PVC edge profile.
Rehau PVC edgebanding 302124-225 is provided in a 300FT length, allowing extended cabinet or panel runs from a single roll during shop production.
Rehau 302124-225 edgebanding is described as PVC edgebanding, so it provides a PVC edge treatment suitable for typical woodworking panel applications.
The FLEX C600005 EMB LAC designation identifies a specific Rehau configuration, helping fabricators reorder the same variant for consistent edge appearance and dimensions.
The 3mm thickness on this PVC edge banding allows a pronounced edge that supports trimming and light profiling while maintaining a solid visual band along panel edges.
The 15/16 inch width gives coverage beyond common panel thicknesses, leaving workable overhang so trimming tools can create a flush, clean edge line.
Rehau PVC edgebanding 302124-225, specified as 15/16 inch by 3mm in a 300FT roll, offers a defined PVC edge banding option for panel work. The FLEX C600005 EMB LAC designation ties this product to a repeatable Rehau configuration, supporting consistent results across new installations and follow-up projects that rely on the same edge dimensions and appearance. For woodworking operations building cabinets, casework, or similar panel-based components, this clearly defined Rehau PVC edgebanding variant helps align material selection with established edge-banding processes.
Sold In: 1 Roll