Rehau PVC edgebanding 302124-514 is a PVC edge banding designed for covering exposed edges on panels, so you can finish cabinet and furniture projects with a consistent, professional edge surface. The SAP description specifies a size of 15/16 x 3mm, which gives you near full coverage on nominal 3/4 inch panels while leaving enough tolerance for trimming and flush cutting. This edgebanding is described as FLEX C600374 LAC, indicating a flexible PVC construction that forms to typical straight cabinet edges and helps accommodate normal panel irregularities during application. The 300 FT length noted in the description provides a continuous run that supports longer production setups or multiple jobs from a single roll, which reduces splice points along visible edges. As an edge banding product in the Wurth Baer Supply assortment, it fits into standard woodworking workflows where a PVC edge finish is required.
The stated 15/16 x 3mm dimensions of this Rehau PVC edgebanding give you a format geared to typical cabinet and furniture panel work, so edges can be trimmed flush without leaving exposed core. The width slightly exceeds standard panel thickness, which supports a consistent trimming margin along the full run of a cabinet side or shelf. The 3mm thickness gives a sturdy PVC layer that tolerates normal trimming and light machining at corners, helping maintain a defined edge profile around doors and panels. The 300 FT roll size in the SAP description streamlines installation on repeated parts, because long runs can be processed from a single coil without frequent material changes during production.
This Rehau PVC edgebanding, identified in the SAP description as 15/16 x 3mm FLEX C600374 LAC 300FT, is positioned as an edge banding solution within Wurth Baer Supply's woodworking-focused assortment. As an edge banding product, it is used on exposed panel edges in cabinet, furniture, and general casework construction where a PVC edge finish is desired. The 15/16 inch width matches common panel sizes used in cabinetry, allowing it to cover vertical sides, horizontal shelves, and door edges with one material size across a project. Because it is classified under Miscellaneous|Edgebanding and Product Class Edge Banding, it serves as a finishing component that visually and physically closes off raw panel edges in typical woodworking shop environments.
The defined 15/16 x 3mm dimension works with common panel thicknesses so installers can run this Rehau PVC edgebanding and trim both faces back to the substrate, creating a uniform edge line from part to part. The FLEX designation in the SAP description indicates a flexible PVC composition, which helps the material track along straight panel edges without fighting the substrate, aiding in smooth application during standard woodworking workflows. With a 3mm thickness, the banding supplies a noticeable PVC face that responds well to trimming knives or mechanical trimmers, helping maintain a consistent reveal on doors, shelves, and cabinets. The 300 FT roll length referenced in the description also contributes to repeatable results by enabling longer continuous runs, so operators can edge many similar components from the same roll with consistent material characteristics throughout the batch.
Rehau PVC edgebanding 302124-514 is specified in the SAP description as 15/16 x 3mm, which suits edging typical furniture and cabinet panels before trimming to a flush finished edge.
The 3mm thickness noted in the description provides a substantial PVC layer that can be trimmed back to the panel faces, supporting a solid, consistent edge line on cabinet components.
The term FLEX C600374 LAC in the SAP description identifies a flexible PVC edgebanding type from Rehau, giving installers a defined formulation when matching materials across jobs.
This Rehau PVC edgebanding is listed as 300 FT in the SAP description, allowing longer production runs and multiple cabinet parts to be edged from a single roll.
This product is classified as edge banding in the Miscellaneous|Edgebanding category, aligning it with cabinet, furniture, and general woodworking panel edging applications.
The 15/16 inch width stated in the description slightly exceeds common panel thickness, giving extra material for trimming and a fully covered edge on standard casework parts.
Rehau PVC edgebanding 302124-514 combines a 15/16 x 3mm size, FLEX C600374 LAC formulation, and 300 FT roll length to support typical cabinet and furniture edge finishing tasks. For shops working with PVC edge banding, these defined dimensions and identifiers streamline matching across jobs. Selecting this Rehau, Inc. edge banding from Wurth Baer Supply aligns your panel edging with a clearly specified PVC product that fits standard woodworking panel formats.
Sold In: 1 Roll