Rehau PVC edgebanding 302124-521 is a PVC edge banding solution that covers and protects raw board edges so finished panels present a clean, consistent edge line. The 15/16 inch width gives coverage that comfortably spans typical panel thickness, which helps hide core material while leaving a small trimming margin for flush finishing. The 3mm thickness provides a substantial edge profile, allowing solid-feeling edges that stand up to regular contact along cabinet and furniture fronts. The material is PVC, so it bonds to compatible adhesives and works predictably in standard woodworking shop conditions without special handling. The product is supplied under manufacturer part number 302124-521, which lets shops reorder the same color and profile for future runs. The SAP description identifies this as FLEX C500023 LAC, signaling a specific flexible PVC formulation and finish series that shops can match across projects.
This Rehau PVC edge banding is identified as 15/16X3MM in the SAP description, so installation setups can be dialed in around that width and thickness for banders and trimmers. The 15/16 inch width provides slight oversize coverage on common board thicknesses, letting installers trim both faces back to a flush edge without starving the surface. The 3mm thickness works with settings intended for thicker banding, which affects heat, feed, and trimming adjustments during runs. The same SAP description specifies a 300FT length designation, giving shops a roll format that supports continuous processing through standard edge banding machines on medium-length production runs.
This Rehau PVC edgebanding, classified under Edge Banding and described as 15/16X3MM FLEX C500023 LAC 300FT, is suited to woodworking environments that process panel goods. The 15/16 inch width lines up well with common cabinet and furniture panel sizes, so fabricators can run this banding along vertical cabinet sides, horizontal shelves, and door or drawer fronts that fall within typical thickness ranges. The 3mm thickness allows use wherever a pronounced edge detail is preferred, such as higher contact areas around fronts and exposed ends. Being part of the Miscellaneous|Edgebanding category, it slots into existing edge banding workflows alongside other profiles, letting shops dedicate this specific Rehau, Inc. product to jobs that call for its particular thickness and format. The 300FT length reference supports runs where continuous feed through an edgebander helps maintain consistent edge appearance from panel to panel.
The 15/16 inch width of this Rehau PVC edgebanding gives a practical amount of overhang on common panel thicknesses, which aids in achieving uniform trimmed edges because there is enough material to align, bond, and then flush-trim without exposing the core. The 3mm thickness provides a stable edge cross-section during trimming, helping tools track along the edge without digging into the face as easily as thinner material might during aggressive passes. The FLEX C500023 LAC notation indicates a defined flexible PVC series and finish, so once machines are set for this banding, shops can repeat those settings when the same part number 302124-521 is used again. This repeatability supports predictable results across production batches, and the 300FT length designation helps keep long machine runs on a single roll, reducing interruptions that could otherwise introduce slight visual changes at edge transitions.
Rehau 302124-521 is a PVC edge banding product, so it is intended to cover and finish exposed edges on panel-based components in woodworking and cabinet work.
This Rehau PVC edgebanding is identified as 15/16 inch wide, giving slight overhang on standard panel thicknesses so edges can be trimmed back flush after application.
The 302124-521 edge banding is 3mm thick, creating a more substantial edge profile that supports heavier contact zones along cabinet and furniture fronts.
FLEX C500023 LAC in the SAP description identifies a specific flexible PVC and finish series, helping shops match color and surface across different jobs using this code.
The SAP description lists 300FT, indicating a 300-foot length that supports continuous processing through edgebanding equipment on small to medium production runs.
The 302124-521 part number uniquely identifies this Rehau PVC edgebanding, which lets shops specify the same width, thickness, and finish when replenishing stock.
Rehau PVC edgebanding 302124-521 from Wurth Baer Supply offers a clearly defined 15/16 inch width, 3mm thickness, and 300FT length designation, giving shops consistent dimensions to plan around. Using this specific part number lets fabricators align tooling setups, material planning, and documentation to a repeatable edge banding standard across cabinet and woodworking projects.
Sold In: 1 Roll