Rehau PVC edgebanding 302164-045, 15/16 x .018

Rehau PVC Edgebanding 302164-045 For Clean Panel Edges

Rehau PVC edgebanding 302164-045 is a PVC edge banding solution that finishes exposed sheet edges, which helps protect cut panel edges and gives projects a consistent, specified look. The 15/16 inch width covers typical panel thickness while allowing a trim margin, so installers can flush-trim back to the board and leave a clean line. The .018 inch thickness provides a thin edge profile, which keeps the edge subtle and close to the face material. The CP40796 reference identifies the design match, so shops can align edge appearance across multiple parts on the same job. The embossed lacquer surface adds texture and a finished coating, which supports a more furniture-like edge presentation. The 600 foot length is suited to production or multi-cabinet runs, giving shops enough material for repeated cuts and consistent setup across parts.

Key Edgebanding Details That Support Shop Work

• The 15/16 inch width spans standard panel thickness with room for trimming, which lets installers run a straight pass with trimmers and deliver a tight, uniform edge on cabinets and casework runs.
• The .018 inch thickness creates a slim band, which helps edges sit close to the panel face so doors, drawer fronts, and shelves keep a low-profile edge consistent with thin PVC designs.
• The CP40796 designation defines the specific pattern series, which allows shops to keep edge details matched on repeat orders when building multiple rooms or replacing fronts within an existing installation.
• The embossed lacquer finish provides a textured, coated surface, which supports a finished look on exposed verticals and shelves where the edge line is visible at eye level.
• The 600 foot length supports extended runs, which is useful for production environments that cut many parts from the same decor without frequent material changeovers.

Edgebanding Size And Finish For Straightforward Application

This Rehau PVC edgebanding uses a 15/16 inch width, which gives enough overhang on common panel sizes to position the banding accurately before trimming. The .018 inch gauge keeps the material easy to handle, which supports smooth feeding through edgebanders and clean trimming at corners. The embossed lacquer surface is factory-finished, so once bonded and trimmed, the edge presents as a finished surface without additional edge coating steps. The PVC construction gives the banding a consistent profile along the 600 foot length, which supports repeatable machine settings across multiple panels during a run.

Where Rehau 302164-045 Fits In Cabinet Work

Using CP40796 Embossed Lacquer Banding On Panels

This Rehau, Inc. PVC edgebanding in the CP40796 embossed lacquer design is positioned for applications where sheet edges remain visible, such as cabinet sides, shelving, and door or drawer fronts built from panel stock. The 15/16 inch band width suits common casework dimensions, which helps align the edge banding with industry panel sizes used in professional woodworking shops. The thin .018 inch profile keeps the edge modest on doors and fronts, which can support a clean, modern appearance when matched to the specified decor. With a 600 foot length, the banding supports projects that require many repeated parts, such as multi-unit cabinetry or larger room layouts drawn from the same material.

Details That Support Repeatable Edgebanding Results

The 15/16 inch by .018 inch sizing gives installers a predictable trimming allowance and edge thickness, which simplifies edgebander setup and hand-trim passes across a full production run. The CP40796 code uniquely identifies the decor, so when shops specify Rehau 302164-045, they can return to the same edge look on later phases or replacement fronts without re-matching patterns. The embossed lacquer finish is applied at the factory, which means that once bonded and trimmed, edges have a consistent sheen and texture that holds across all 600 feet on the roll. The PVC material maintains a uniform cross-section, allowing production teams to keep pressure, temperature, and trimming parameters consistent from the first part through the last.

Common Questions About Rehau PVC Edgebanding 302164-045

Select Rehau 302164-045 For Consistent Edge Details

The combination of 15/16 inch width, .018 inch thickness, and CP40796 embossed lacquer design gives this Rehau PVC edgebanding 302164-045 a defined role in panel finishing. The 600 foot length supports both individual shops and production lines that standardize on a specific edge look. When a project calls for PVC edge banding in this size and finish from Rehau, Inc., this part number ties directly to that requirement and keeps edge appearance consistent across runs.