Rehau PVC edgebanding 302164-062 provides a dedicated edge treatment so exposed panel edges can be finished to match a project layout and keep a consistent material choice on cabinet or furniture runs. The PVC edgebanding construction gives a uniform work surface during trimming and scraping, which supports predictable cuts along the length of a job. The 15/16 inch width noted in the SAP description helps cover common panel thicknesses while giving a slight overhang for flush trimming, which supports a smooth transition between face and edge. The .018 inch thickness stated in the same description sets the profile for how the edge feels and trims under typical routing passes. The CP40673 EMB34 LAC reference in the SAP description identifies a specific Rehau, Inc. design line, which helps align this roll with matching components on multi-room or repeat build projects.
The 15/16 inch width referenced in the SAP description gives a slight margin beyond many panel thicknesses, which allows installers to apply the banding without precision pre-trimming and then flush-trim for a clean edge. The .018 inch thickness named alongside that width defines how much material sits proud of the substrate before trimming, shaping how routers or edge trimmers are set for each pass. The PVC designation in the product name identifies a single material family, so cutting tools can be chosen and calibrated around that material for repeatable passes. The 600FT roll length in the SAP description supports longer continuous edges and larger batches, which can reduce downtime between banding operations on shop lines.
The category placement as Edge Banding positions this Rehau, Inc. product for covering raw or exposed edges on casework, cabinets, and similar woodworking assemblies. The 15/16 inch width called out in the SAP description suits edges on typical panel-based construction, such as cabinet sides, shelves, and vertical partitions. With a .018 inch thickness recorded in the same description, this edgebanding fits applications where a relatively thin edge profile is desired to keep a subtle transition from face to edge. The CP40673 EMB34 LAC wording in the SAP description defines a particular style within the Rehau line, which supports use on projects that call for that specific visual reference in documents or repeat orders.
The SAP description specifies a 600FT length, giving installers and shops a substantial continuous run that supports batching many parts without frequent roll changes, which helps hold setup conditions steady across the batch. The defined 15/16X.018 size means tool setups for trimming and scraping can be dialed in to that single profile, supporting repeatable edges from cabinet to cabinet. The PVC edgebanding designation in the product name keeps material behavior consistent, so feed rates and cutter choices can stay stable instead of changing by edge location. The manufacturer part number 302164-062 links directly to Rehau documentation, which supports consistent reordering when the same edge profile and style are required on follow-up phases or matching installations.
Rehau PVC edgebanding 302164-062 uses PVC material, which gives a consistent edge surface that responds predictably to routing, trimming, and scraping during normal cabinet or furniture production.
The 15/16X.018 size in the SAP description defines width and thickness, shaping how far the banding overhangs the panel and how it trims to create a smooth, low-profile edge.
The SAP description states a 600FT length, giving sufficient material for longer runs of cabinets or casework so multiple edges can be finished from the same roll.
The CP40673 EMB34 LAC text in the SAP description identifies a specific Rehau configuration, supporting alignment with design references that call for that exact style.
The manufacturer part number 302164-062 ties this Rehau PVC edgebanding to a precise catalog entry, supporting consistent selection when projects repeat the same edge profile.
The product class as Edge Banding and category Edgebanding position it as the edge finishing component in cabinet and woodworking workflows.
The Rehau PVC edgebanding 302164-062 pairs a 15/16 inch width with a .018 inch thickness and a 600FT roll length as stated in the SAP description, giving installers a defined profile and run length to organize edge work. The Rehau, Inc. branding and specific manufacturer part number anchor this item to a repeatable specification, which is useful when projects extend over multiple phases or when existing cabinetry needs matching edges. For cabinet shops and woodworking operations that want a clearly identified PVC edge banding profile in their process, this Rehau PVC edgebanding 302164-062 offers a documented size, length, and style reference for ongoing use.
Sold In: 1 Roll