Rehau PVC edgebanding 302164-063 is a PVC edge banding from Rehau, Inc. that provides a finished edge on qualifying panel and board projects. The material is identified as PVC, so it creates a consistent, machinable edge that works well in woodworking environments where synthetic edging is preferred over raw substrate. The 15/16 inch width recorded in the SAP description helps cover typical panel thicknesses with a slight overhang, giving room for trimming flush after application on casework, shelving, or similar runs. The .018 inch thickness listed in the same description keeps the edge profile relatively thin, which supports a clean transition from face to edge without a bulky line. The 600FT length in the designation indicates extended linear footage, so longer cabinet or fixture jobs can be handled with fewer changeovers during the edging process.
The 15/16 inch width called out in the SAP description gives installers a dimension that spans standard board thicknesses, so feed equipment can register the strip with enough margin for trimming without exposing the substrate. With the .018 inch thickness noted, the banding presents a slim profile that responds predictably to edge trimmers and routers, helping keep the final radius or square edge consistent across multiple parts. The 600FT length in the same designation provides continuous footage suited to edging longer runs of shelving or repeated cabinet components, which supports uninterrupted workflow on edgebanding stations. Identifying the product as Rehau PVC edgebanding allows shops that process PVC to align their temperature, feed speed, and trimming expectations around a known PVC-based edge material.
This product is defined as Rehau PVC edgebanding in the Edge Banding product class, so it integrates into woodworking shops that rely on PVC edges for cabinets, fixtures, or similar assemblies. The 15/16 inch width from the SAP description gives operators a band that reliably covers panel edges used in many casework designs, so both vertical and horizontal members can be processed on the same edgebanding line. Because the thickness is recorded as .018 inch, the resulting edge is relatively fine, which suits applications where a subtle, low-profile edge is desired on visible cabinet fronts or interior shelving. The 600FT length indicated supports batch production of multiple components for a project, so parts such as sides, bottoms, and shelves can be edged from the same run for uniform appearance along all exposed edges.
The SAP description 15/16X.018 CP20317 EMB34 LAC 600FT provides a clear combination of width, thickness, and length that can be recorded in shop standards, so operators can repeat successful machine setups when this product is used on future jobs. Having 15/16 inch width documented allows edgebander operators to set guide positions and trimming allowances around a known size, which supports consistent flush results across multiple shifts. The .018 inch thickness detail informs cutter selection and pressure settings on trimmers, helping maintain predictable edge quality without over-cutting the PVC layer. The 600FT length reference means planners can estimate linear coverage for runs of components, which supports job planning where a single coil of this Rehau PVC edgebanding is assigned to a defined group of cabinet or furniture parts.
Rehau PVC edgebanding 302164-063 is identified as PVC edgebanding, so it uses a PVC material that matches processes set up for synthetic edge treatment in woodworking shops.
The SAP description lists the Rehau 302164-063 PVC edgebanding at 15/16 inch wide, which provides coverage over common panel thicknesses while leaving material for trimming flush.
The SAP description records a thickness of .018 inch, giving a relatively thin edge that supports a clean transition from surface to edge after trimming.
The designation states 600FT, so this Rehau PVC edgebanding offers 600 feet of linear material for extended edging runs on cabinet or furniture components.
The 302164-063 manufacturer part number uniquely identifies this Rehau PVC edgebanding variant, helping match the exact product on shop lists or project specifications.
The Edge Banding product class indicates this Rehau PVC edgebanding is intended to finish exposed board edges, supporting cabinet and casework construction in woodworking settings.
Rehau PVC edgebanding 302164-063 combines a 15/16 inch width, .018 inch thickness, and 600FT length, as detailed in the SAP description, so it suits edge-finishing workflows that depend on known dimensions. Specifying this exact manufacturer part number aligns purchasing and shop setup around a clearly identified Rehau, Inc. PVC edgebanding. For projects that call for PVC edge treatment within the Edge Banding product class, this defined size and length support planning, setup, and repeatable edging results.
Sold In: 1 Roll