Rehau PVC Edgebanding 302164-066 For Clean Edges

Rehau PVC edgebanding 302164-066 is a PVC edge banding from Rehau, Inc. that covers and finishes raw panel edges so cabinet and furniture projects present a uniform, professional look. The 15/16 inch width matches common panel thickness ranges, so the strip covers the edge and allows trimming without exposing the core. The .018 inch thickness keeps the banding low profile on the edge, which helps panels keep their finished dimensions while still masking the substrate. The CP20124 EMB34 LAC designation identifies a specific finish and design group, so repeated jobs using this same code maintain consistent visual appearance across multiple runs. The 600FT length in the SAP description supports longer production runs or multiple smaller projects from one coil, which helps reduce changeover time during edge processing.

Key Rehau PVC Edgebanding Details For Projects

• The PVC material in this edge banding creates a defined transition between the panel face and edge, so finished pieces look more uniform in cabinetry and woodworking.
• The 15/16 inch width specified in the SAP description gives coverage beyond standard panel thickness, which leaves enough material for trimming and flushing edges after application.
• The .018 inch thickness noted in the product description provides a slim edge profile, which helps keep the overall panel dimension close to design size while still hiding the substrate core.
• The CP20124 EMB34 LAC designation ties the banding to a specific Rehau finish series, which supports visual consistency when matching edges to coordinated surfaces in repeat work.
• The 600FT length described supports extended runs of edge work, which reduces time lost to frequent material changes during production and allows multiple components to share the same finish code.

Edgebanding Dimensions That Support Straightforward Application

This Rehau edgebanding is identified as 15/16 inch wide, so it extends slightly past typical panel edges and allows for trimming operations to bring the banding flush without risking exposed core material. The .018 inch thickness from the SAP description means the banding adds only a small build to the panel edge, which keeps cabinets and other assemblies closer to their design dimensions when parts must fit into tight reveals. The 600FT length noted in the description keeps one continuous supply of edge material available through many parts, supporting a smoother workflow across edge-banding equipment or manual application processes.

How This Rehau PVC Edgebanding Fits Shop Work

Using This Edge Banding In Woodworking Applications

This product is classified as PVC edgebanding from Rehau, Inc., so it is intended for finishing exposed edges on panels in woodworking and cabinet projects. The 15/16 inch width gives coverage that works with typical panel sizes used in casework, shelving, and similar constructions where a clean edge is needed. Because it is part of the Miscellaneous|Edgebanding category and Edge Banding product class, it fits directly into standard shop workflows where raw cut edges need to be covered before installation. The CP20124 EMB34 LAC identification links the banding to a specific appearance profile, which helps shops keep uniform edges across matching doors, drawer fronts, and carcass parts within the same job. The 600FT description supports runs where many parts share this same edge detail, allowing projects such as kitchens or larger built-ins to use one consistent edge treatment.

Why Size And Part Number Matter For Repeatable Results

The manufacturer part number 302164-066 precisely identifies this combination of width, thickness, and finish, which is important when reordering to keep later projects visually aligned with earlier work. The 15/16 inch by .018 inch dimensions mean cutting and trimming setups can be dialed in once for this size, then repeated whenever more of this same Rehau PVC edgebanding is used. The SAP description 15/16X.018 CP20124 EMB34 LAC 600FT records all of these key parameters in a single line, which simplifies specifying material on project lists or shop cut sheets. Because the product sits in the Edge Banding class, it integrates naturally with existing edge-banding equipment settings that are tuned for similar PVC strips. Over multiple runs, using this fixed part number and size combination helps maintain consistent edge appearance and fit across cabinets, panels, and furniture components built at different times.

Common Questions About Rehau 302164-066 Edgebanding

Select Rehau PVC Edgebanding 302164-066 For Consistent Edges

Rehau PVC edgebanding 302164-066 from Wurth Baer Supply combines a defined 15/16 inch by .018 inch size with a specific CP20124 EMB34 LAC finish, so repeated work stays visually consistent. The 600FT description supports ongoing cabinet and woodworking projects that rely on uniform, finished edges.