Rehau PVC edgebanding 302164-120 15/16 x .018

Rehau PVC Edgebanding 302164-120 For Clean Edges

Rehau PVC edgebanding 302164-120 is a PVC edge banding from Rehau, Inc. that is built for finishing exposed panel edges in woodworking and cabinet projects. The SAP description lists 15/16X.018 CP40865 EMB LAC 600FT, which identifies this as a 15/16 inch wide edgeband with an approximate .018 inch thickness supplied in a 600 foot length. That width works with many panel thicknesses where a small overhang is trimmed, helping installers produce a flush, professional edge on casework or shelving. The thin .018 inch construction lets trimming tools cut cleanly with less resistance, which supports consistent results across long runs. The 600 foot length supports larger jobs or repeated use on a production bench without frequent changeover, which helps maintain workflow on cabinetry or other furniture components.

Key Edgebanding Details That Support Work

• The Rehau PVC edgebanding is identified as edge banding, so it is intended to cover and protect raw panel edges, giving cabinet and furniture projects a finished look that matches adjacent surfaces.
• The 15/16 inch width described in the SAP detail gives enough coverage to span common casework edge thicknesses, leaving material for trimming so installers can dial in tight edges.
• The .018 inch thickness referenced in the SAP description keeps the PVC edgeband relatively thin, which helps trimming tools track smoothly and reduces the effort needed to flush the edge with surrounding surfaces.
• The 600 foot length called out in the SAP description supports extended runs of cabinet or woodworking production, so shops can edge many parts from a single roll before switching materials.
• The product is classified under Edge Banding and Edgebanding categories, tying it directly to typical woodworking and cabinetmaking applications where consistent, matched edges are important.

Size And Material Details For Installation Planning

This Rehau PVC edgebanding is described as 15/16X.018, so installers can plan their edge details knowing the material is about 15/16 inch wide and roughly .018 inch thick. That width allows a bit of overhang on standard panel edges, which is useful when setting trimming tools to bring the edge perfectly flush without cutting into the face. The thin PVC profile lets knives or router bits work in light passes, which helps keep edges straight along tall cabinet sides or long shelves. Because the product type is PVC edge banding, it fits into established edgebanding workflows in woodworking shops and on jobsite cabinetry touchups.

Using Rehau PVC Edgebanding In Woodworking

Where This Rehau PVC Edgebanding Fits Best

The product is identified as Rehau PVC edgebanding under the Edge Banding and Edgebanding categories, so it is suited to panel-based woodworking and cabinet construction where raw substrate edges need a finished surface. The 15/16 inch width works well on many cabinet sides, shelves, and similar components, giving enough coverage to conceal the core while leaving trim margin. Because the material is PVC, it integrates into common shop processes that rely on edgebanding to match laminate or other surfacing. The 600 foot length supports environments where repeated edge finishing is part of daily production, allowing long sequences of panels to be processed from the same roll.

Dimensions That Support Repeatable Edge Results

The SAP description 15/16X.018 CP40865 EMB LAC 600FT gives installers clear dimensional cues for setup. The 15/16 inch width helps align guides and fences so the band slightly overhangs panel faces, which is important for trimming the edge back cleanly. The approximate .018 inch thickness allows trimming tools to remove just a small amount of material, supporting fine control over edge flushness. With 600 feet available, shops can standardize their equipment settings around this specific PVC edgeband and run multiple batches of parts without reconfiguring for a new size. That consistency helps reduce rework on cabinetry and other panel-built projects.

Common Questions About Rehau PVC Edgebanding 302164-120

Select Rehau PVC Edgebanding 302164-120 For Edge Work

Rehau PVC edgebanding 302164-120 pairs a 15/16 inch width with an approximate .018 inch thickness in a 600 foot length, giving shops a defined material profile for panel edge finishing. As PVC edge banding from Rehau, Inc., it fits established edgebanding workflows on cabinets, shelves, and other panel components. For woodworking operations that need consistent, repeatable edges across multiple parts, this defined size and material combination supports stable tool setup and dependable results.