Rehau PVC edgebanding 302164-126 is a PVC edge banding designed to finish exposed edges on panels, so cabinet and furniture projects present clean, uniform lines instead of raw core material. The 15/16 inch width from the SAP description "15/16X.018 CP40866 EMB LAC 600FT" covers typical 3/4 inch panel edges with a margin, which helps installers trim flush without risking a visible gap. The .018 inch thickness from the same description provides a low-profile edge, which matters when aligning doors and drawer fronts where thicker edges could affect reveals. The CP40866 reference gives a specific design code, allowing shops to match this edgeband to a known surface or finish program across projects. The EMB LAC notation identifies an embossed lacquer surface, which creates a textured finished edge that visually coordinates with embossed and lacquered panel faces in cabinet and casework runs.
This Rehau edge banding is identified as 15/16X.018 in the SAP description, so its width and thickness are defined for layouts where panel thickness and overhang clearances are planned in advance. The PVC construction noted in the product name "Rehau PVC Edgebanding" supports use on typical cabinet and furniture substrates that accept PVC edging, which matters when standard edgebanding machinery is set up around PVC parameters. The EMB LAC notation signals an embossed lacquer surface, so fabricators aligning this edge to embossed lacquer panels can keep texture and sheen consistent along the full cabinet or fixture run. With a 600FT reference in the SAP description, this edgeband suits longer production sequences where repeatable feed, trimming, and scraping settings are dialed in for a single material without frequent material changes.
This product is listed under Edge Banding and Edgebanding categories, so it serves as the finishing edge on cabinet, furniture, and casework panels where exposed edges need a defined PVC finish. The 15/16 inch width from "15/16X.018 CP40866 EMB LAC 600FT" gives coverage for common 3/4 inch panel constructions, which is useful on cabinet sides, tops, shelving, and door or drawer fronts that require a consistent reveal line. The CP40866 decor code aligns this edgeband with a specific visual program, so shops running matching faces and edges can keep color and pattern coordination across multiple components in kitchens, baths, and commercial millwork.
The .018 inch thickness from the SAP description positions this Rehau PVC edgebanding as a thin edge, which simplifies setup on edgebanders tuned for light trimming and scraping passes. The embossed lacquer (EMB LAC) surface helps the finished edge present as a textured, lacquered strip, which matters when transitioning from panel face to edge where visual continuity is important. Being identified specifically as Rehau PVC Edgebanding, 302164-126 ties to a defined manufacturer part number, giving shops traceability for reorders that keep future replacement doors or panels visually aligned with existing installations. The 600FT length reference supports extended production runs, so once feed rates and temperature settings are dialed in around this PVC edge, operators can process many parts while staying within the same material setup.
Rehau PVC Edgebanding 302164-126 uses a 15/16 inch width from the SAP description, which covers typical 3/4 inch panels with extra margin for trimming to a flush, clean edge.
Rehau PVC Edgebanding 302164-126 has a .018 inch thickness, providing a slim edge that helps maintain consistent reveals where doors, drawer fronts, and panels meet.
Rehau PVC Edgebanding 302164-126 uses CP40866 as a decor code, so shops can match this edge visually to a known surface design across projects and replacements.
Rehau PVC Edgebanding 302164-126 lists EMB LAC, indicating an embossed lacquer surface that helps the edge visually coordinate with embossed and lacquered panel faces.
Rehau PVC Edgebanding 302164-126 includes a 600FT reference in the SAP description, which suits longer cabinet or furniture runs using one continuous material setup.
Rehau PVC Edgebanding 302164-126 is categorized as Edge Banding and is used to finish exposed edges on cabinet, furniture, and casework panels with a defined PVC finish.
Rehau PVC Edgebanding 302164-126 combines a 15/16 inch width, .018 inch thickness, CP40866 decor code, and EMB LAC embossed lacquer surface into a defined edge solution for cabinet and furniture work. The 600FT length noted in the SAP description supports continuous shop runs where a single PVC edge setup serves many parts. Selecting this specific manufacturer part number 302164-126 aligns projects to a known Rehau PVC edge, simplifying repeat orders when matching existing installations or extending a finish program across new jobs.
Sold In: 1 Roll