Rehau PVC edgebanding 302164-134 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges on furniture and casework, giving sheet goods a finished look while masking the exposed core.
The SAP description 15/16X.018 CP40887 EMB LAC 600FT identifies this as 15/16 inch wide, .018 inch thick PVC edgebanding, so it matches common panel thicknesses and creates a slim, low-profile edge that blends into the panel face.
The 600FT length in the SAP description means this edgebanding is supplied in a long continuous run, which supports uninterrupted edging on multiple panels and reduces changeovers during larger runs of cabinets or fixtures.
The product class Edge Banding and category Miscellaneous|Edgebanding show that this Rehau PVC edgebanding is intended for edge finishing tasks in woodworking and cabinet production, helping installers handle exposed edges with a single consistent material.
The 15/16 inch width listed in the SAP description 15/16X.018 CP40887 EMB LAC 600FT gives enough edge coverage during installation for typical sheet goods, allowing an installer to align and trim the banding back to the panel surface.
The .018 inch thickness called out in the SAP description keeps the PVC edgebanding relatively thin, so trimming tools can flush the edge with moderate cuts and leave a smooth transition without requiring deep passes.
The CP40887 EMB LAC portion of the SAP description defines a consistent design reference for installation planning, so an installer can select this edgebanding when a specification or drawing calls out that exact Rehau code.
The 600FT length in the SAP description supports continuous edging on long cabinet runs or multiple case bodies, helping installers edge several components in sequence without stopping for frequent material changes.
The category Miscellaneous|Edgebanding and product class Edge Banding indicate that Rehau PVC edgebanding 302164-134 is used wherever raw panel edges on woodworking projects need covering, such as cabinet boxes, shelves, and panel-based fixtures.
The PVC edgebanding material identified in the product name is suitable for edge finishing on panel products that accept edge banding, so shops can apply it along exposed sides of casework or furniture components built from sheet goods.
The 15/16 inch width in the SAP description 15/16X.018 CP40887 EMB LAC 600FT is sized for typical panel thickness ranges, meaning one width can serve many standard cabinet parts in a shop without swapping to different widths for most edges.
The 600FT roll length from the SAP description supports use in production environments where multiple identical cabinets or panels are edged in sequence, allowing the same Rehau PVC edgebanding to run across the entire batch.
The manufacturer part number 302164-134 ties directly to the Web Description WBSC - 1432 - RU302164-134, giving shops a reference for purchasing and job documentation when Rehau PVC edgebanding is specified on plans or cut lists.
The 15/16 inch by .018 inch sizing from the SAP description 15/16X.018 CP40887 EMB LAC 600FT balances coverage and thinness, which helps edge-banding machines or manual setups trim the overhang cleanly while leaving enough material to hide the core.
The .018 inch thickness noted in the SAP description keeps the edge light, helping reduce the visual step between the panel face and edge once trimmed, which is important when aligning edges on cabinet doors or visible casework sides.
The CP40887 EMB LAC design code in the SAP description provides a repeatable specification for projects, so when shops or installers return to a job for additions they can select the same Rehau PVC edgebanding and maintain appearance continuity.
The 600FT length specified in the SAP description allows larger runs of edging to draw from one continuous roll, which supports consistent feed behavior through edge-banding equipment and helps keep the edge appearance uniform from part to part.
The clear manufacturer part number 302164-134 allows teams to record exactly which Rehau PVC edgebanding was used on a project, which supports repeat work, change orders, or matching replacement parts without guessing from visual samples.
Rehau PVC edgebanding 302164-134 uses the 15/16X.018 size from the SAP description, meaning it is 15/16 inch wide and .018 inch thick for covering common panel edges.
Rehau PVC edgebanding 302164-134 is designated 600FT in the SAP description, providing 600 feet of continuous PVC edge banding for multiple panels or cabinet runs.
Rehau PVC edgebanding 302164-134 lists CP40887 EMB LAC in the SAP description, identifying a specific Rehau design and finish reference for matching specified jobs.
Rehau PVC edgebanding 302164-134 is in the product class Edge Banding and category Miscellaneous|Edgebanding, so it is intended for edge finishing on panel-based work.
Rehau PVC edgebanding 302164-134 is produced by Rehau, Inc., providing a branded PVC edge banding option identified by manufacturer part number 302164-134.
Rehau PVC edgebanding 302164-134 uses a 600FT length, allowing longer cabinet or panel runs to be edged from a single roll for consistent material use.
Rehau PVC edgebanding 302164-134, identified by the SAP description 15/16X.018 CP40887 EMB LAC 600FT, offers a defined width, thickness, design code, and roll length for edge finishing.
The manufacturer part number 302164-134 and category Miscellaneous|Edgebanding from Wurth Baer Supply let shops specify this exact Rehau PVC edge banding when a project calls out CP40887 EMB LAC or the matching Rehau reference.
Using this clearly coded Rehau PVC edgebanding helps align panel edge work with drawing notes, cut lists, and future repeat orders, supporting consistent results across cabinet or furniture runs.
Sold In: 1 Roll