Rehau PVC edgebanding 302164-137 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, so cabinet and furniture projects present a finished face instead of exposed core material. The 15/16 inch width gives coverage across standard panel thicknesses with a little margin, which helps installers trim flush without exposing the substrate. The .018 inch thickness keeps the edge profile slim, so doors and drawer fronts maintain tight reveals and hardware clearances. The CP40889 EMB LAC designation identifies a specific decor and surface texture, which keeps visual matches consistent across multiple jobs or repairs using the same code. The 600FT length groups a large amount of banding into one continuous run, which suits production shops that want fewer changeovers at the edgebander and fewer joints to manage on long batches.
This Rehau PVC edgebanding uses a 15/16 inch width that gives edge coverage with overhang on common panel sizes, so the installer can trim back to a clean line instead of working right at the substrate edge. The .018 inch thickness limits the buildup at the edge, so after trimming the transition from surface to edge remains compact and less prone to catching on doors or drawer faces in close clearances. The 600FT length supports continuous feeding in an edgebander, so longer parts and repeated runs can be processed without frequent reel changes or mid-run splices that interrupt the cut quality.
The Rehau PVC edgebanding 302164-137 functions as edge banding in the Miscellaneous|Edgebanding category, so it is suited to covering exposed edges on casework, cabinetry, and similar panel-based assemblies. The 15/16 inch width allows use on panels near three-quarter inch thickness with some tolerance, so one size can often serve across doors, drawer fronts, and cabinet sides within the same project. The PVC material and .018 inch thickness allow the banding to accept machining and trimming in typical shop setups, so it works in workflows that rely on standard edgebanders and edge trimmers. The CP40889 EMB LAC description, tied to the manufacturer part number 302164-137, defines a repeatable appearance, so shops that standardize on this code can maintain consistent edges across new builds and future replacements that reference the same part number.
The .018 inch thickness on this Rehau edge banding limits the material removed during trimming, so knives and cutters engage less material at the edge, which supports smoother passes and can reduce the chance of chatter on the substrate. The 15/16 inch width provides manageable overhang, so operators can align the strip quickly during application and still end up with enough excess to trim to a straight, square finished edge. The 600FT roll length supports continuous work on long cabinet or furniture runs, so setups can stay consistent across an entire batch rather than changing materials mid-stream. Because the manufacturer part number 302164-137 and CP40889 EMB LAC description refer to a specific Rehau, Inc. product, shops can reference those identifiers when repeating a job, which helps maintain continuity in color and surface appearance at each edge.
Rehau PVC edgebanding 302164-137 is specified as 15/16 inch wide and .018 inch thick, which supports full edge coverage with a slim profile for cabinetry and panel projects.
The 600FT length provides a long, continuous run of edgebanding, which reduces material changeovers on edgebanders and supports consistent results across larger batches of panels.
The CP40889 EMB LAC description identifies a specific appearance and finish for this Rehau banding, which supports visually consistent edges when the same code is used on repeat jobs.
The .018 inch thickness keeps the PVC banding relatively thin, so after trimming the edge remains low-profile, helping doors, drawer fronts, and panels maintain tight visual lines.
The 15/16 inch width spans typical panel thicknesses while leaving trim allowance, so installers can create clean, flush edges without risking exposure of the core material.
The manufacturer part number 302164-137 from Rehau, Inc. uniquely identifies this PVC edge banding, which helps shops reorder the same edge detail for future matching work.
The Rehau PVC edgebanding 302164-137 from Rehau, Inc. combines a 15/16 inch width, .018 inch thickness, and 600FT length to support panel edge finishing in cabinet and furniture work. The CP40889 EMB LAC description and defined part number give shops a clear reference for repeating the same appearance on future jobs. For projects that rely on consistent edge coverage and a slim, workable PVC profile, this edge banding offers defined dimensions and identification suited to production-oriented workflows.
Sold In: 1 Roll