Rehau PVC edgebanding 302164-147 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, so finished work presents a uniform edge instead of exposed core. This edgebanding belongs to the Edge Banding product class, which means it is intended specifically for capping panel sides rather than broad surfaces, helping casework, shelving, and similar projects reach a consistent finished appearance. The SAP description identifies this stock as 15/16X.018 CP40911 EMB LAC 600FT, so it provides a 15/16 inch wide strip sized for typical 3/4 inch panels with overhang for trimming. The .018 inch thickness gives a thin edge treatment that blends tightly to the substrate, which is useful when smooth transitions at corners and seams matter in the finished job. The 600FT designation describes an extended run length that supports larger runs of casework or multiple smaller projects from the same material.
The SAP description 15/16X.018 CP40911 EMB LAC 600FT shows that this Rehau PVC edge banding is cut to 15/16 inch width and .018 inch thickness, so it is sized for typical edgebanding tools and trimmers used on 3/4 inch casework panels. The PVC material defined in the product name describes a plastic edging that responds predictably to common edgebanding processes, such as bonding along the panel edge and trimming flush once the bond is set. The embossed lacquer designation in the SAP text indicates a structured and coated surface, which matters during installation because the installer can orient the decorative face of the strip consistently along cabinet runs, shelves, or partitions.
This product is categorized as Edgebanding under Miscellaneous|Edgebanding, so it is intended for applications where exposed panel edges need to be finished to match or complement the main panel surface. The PVC material stated in the product name suits woodworking environments that use engineered panels, because it bonds to the narrow edge of substrates instead of broad faces, forming a defined boundary between the core and the visible exterior. The 15/16 inch width from the SAP description allows the strip to cover standard 3/4 inch boards with extra material on each side, giving room for trimming tools to cut a straight, clean line. In practice, this lets the installer run the edgebanding slightly proud of the surfaces, then trim both faces back to the panel for a consistent result across carcasses, shelving, and partitions.
The .018 inch thickness in the SAP description sets a relatively thin edge, which reduces the visual step at the transition between the panel face and the edging, helping doors and drawer fronts sit close together without a bulky edge. The EMB LAC notation specifies an embossed lacquer treatment, so the surface carries both texture and coating that contribute to how light plays along the edge line, which helps align the look with finishes that share similar structure or sheen. The CP40911 identifier ties this Rehau PVC edgebanding to a defined pattern reference, which is important on repeat jobs where subsequent orders must match existing cabinets or fixtures. The 600FT length supports extended production runs from a single roll, allowing sequences of doors, drawer fronts, or shelving to be edged from one continuous supply so color, texture, and sheen stay consistent from part to part.
Rehau 302164-147 is a PVC edgebanding in the Edge Banding product class, so it is designed specifically for finishing and covering the narrow edges of panels.
The SAP description lists the edgebanding as 15/16 inch wide, giving coverage for typical 3/4 inch panels with extra material available for trimming flush to the surfaces.
The .018 inch thickness in the SAP description indicates a thin edge profile, which produces a subtle transition between panel face and edge for a clean finished line.
The CP40911 reference in the SAP description identifies a specific Rehau program or pattern, which supports visual matching when coordinating with other components using the same reference.
The EMB LAC notation describes an embossed lacquer surface, meaning the edging has a textured and coated finish that influences how the edge appearance relates to nearby surfaces.
The 600FT length in the SAP description indicates a long run of PVC edgebanding, supporting extended sequences of doors, drawers, or shelves edged from a single continuous supply.
Rehau PVC edgebanding 302164-147 from Rehau, Inc. combines a 15/16 inch width, .018 inch thickness, and CP40911 EMB LAC surface in a 600FT length, so it supports consistent edge finishing across casework projects. The Edge Banding product class and PVC construction focus this item on covering exposed panel edges rather than surfaces, which suits cabinet, fixture, and shelving builds that rely on engineered panels. For projects where matching pattern, texture, and sheen across runs matters, this specific manufacturer part number 302164-147 offers a defined reference for future orders and coordinated component lists.
Sold In: 1 Roll