Rehau PVC edgebanding 302164-159 gives cabinet and furniture projects a defined edge line using a PVC edge banding material from Rehau, Inc. As an edge banding product, it covers raw substrate edges so sheet goods present as finished components in visible areas. The 15/16 inch width works across standard panel thicknesses where a small overhang can be trimmed for a flush finish. The .018 inch thickness keeps the edge light while still forming a clear transition between surface and core on shop-built parts. The CP20791 designation identifies a specific look within the line so repeating the same code helps match previous work. The embossed lacquer surface noted in the description contributes a textured, coated appearance that supports a consistent visual across doors, drawer fronts, or casework runs.
The 15/16 inch width on this Rehau PVC edge banding lets installers run the tape slightly proud of both faces, then trim back to the panel for a clean line. That extra fraction over typical panel thickness helps keep the glue line and substrate completely covered once trimming is complete. The .018 inch thickness limits the build at the corner, which helps cabinet doors and drawer fronts avoid a bulky feel where two banded edges meet. The CP20791 embossed lacquer specification defines the surface effect, so all edges on a project share the same appearance when this code is used throughout.
This Rehau PVC edgebanding in 15/16 inch width works along edges of case parts, shelves, and fronts that are cut from sheet goods. With a width slightly larger than many common board thicknesses, it lets shop staff run the banding with a bit of overhang for later trimming. The .018 inch thickness keeps the final edge profile relatively slim, which helps doors close against each other without a heavy seam where two edges meet. As an edge banding product, it becomes the visible strip on cabinet and furniture components, turning exposed core edges into finished lines that match the chosen look for the job.
The manufacturer part number 302164-159 ties directly to this specific Rehau PVC edge banding, so listing that number on job tickets and cut lists helps repeat the same material on follow-up work. The SAP description 15/16X.018 CP20791 EMB LAC 600FT groups the size and embossed lacquer CP20791 finish into one reference, which supports consistent selection when a project calls for the same edge across multiple phases. Using the same CP20791 identification on every banded edge keeps the texture and appearance aligned, which matters when cabinets, fixtures, and furniture pieces from different runs sit side by side in a finished space.
Rehau 302164-159 is a PVC edge banding product, so it is used to cover and finish exposed edges on cabinet and furniture panels made from sheet goods.
Rehau PVC edgebanding 302164-159 has a 15/16 inch width, giving coverage beyond typical panel thickness so the edge can be trimmed back for a flush finish.
This Rehau PVC edge banding has a .018 inch thickness, which keeps the edge profile relatively slim while still defining a clear transition at the panel corner.
The CP20791 embossed lacquer notation in the description indicates a specific textured and coated surface effect, helping keep edge appearance uniform across a project.
The part number 302164-159 uniquely identifies this Rehau PVC edgebanding, so referencing it on orders and job notes helps repeat the same edge material over time.
This PVC edge banding acts as the finishing strip on exposed panel edges, turning raw core sides into visually finished edges that align with the selected design.
This Rehau PVC edgebanding 302164-159 uses a 15/16 inch width and .018 inch thickness to turn raw panel edges into consistent finished lines. The CP20791 embossed lacquer designation and specific part number provide a clear reference for repeating the same look across future work.
Sold In: 1 Roll