Rehau PVC edgebanding 302164-198 is a PVC edge banding designed to finish exposed panel edges in woodworking projects. The 15/16 inch width covers typical 3/4 inch panels and slight overhang, giving you material to trim flush for a precise edge. The .018 inch thickness keeps the banding low profile, so it follows panel lines closely for a neat, unobtrusive finish. The CP41124 designation identifies the specific decorative match, helping you align this banding with the intended surface design on your job. An embossed lacquer surface adds texture and a finished topcoat, so the edge reads as a completed surface rather than a raw strip. The 600 foot length is sized for shop and production use, allowing longer runs or multiple projects from a single roll, which reduces changeovers during repetitive edging work.
The 15/16 inch width on Rehau PVC edgebanding 302164-198 gives you a controlled amount of overhang on standard panel thicknesses, which is useful when setting up trimmers or hand tools for final flush-trim passes. Because the material is .018 inch thick, it behaves like a thin band during application, which can help with feeding and cutting when you are working along straight cabinet or furniture components. The embossed lacquer surface is already finished, so once bonded and trimmed, the edge reads as a completed part of the panel without extra surface steps on the band itself. With 600 feet available on one roll, production sequences can cover multiple cabinet runs using the same decorative reference CP41124 without pausing to change rolls mid-process.
Rehau PVC edgebanding 302164-198 is an edge banding intended for woodworking use, aligning with the product range offered by Wurth Baer Supply to the woodworking industry. Its 15/16 inch width matches work on panel-based cabinet and furniture components where edges need a finished appearance. The .018 inch thickness makes this banding suitable anywhere a thin, unobtrusive edge treatment is preferred on flat panel constructions. Because the product is part of Rehau, Inc. edge banding, it aligns well with shop environments that routinely finish exposed edges on laminated or surfaced boards. The CP41124 identifier ties it to a particular decorative reference, so it slots into projects that specify that series in shop drawings or materials lists.
The combination of 15/16 inch width and .018 inch thickness on Rehau PVC edgebanding 302164-198 lets installers work with predictable trimming behavior along the panel edge, which is important for repeatable results across multiple parts. The embossed lacquer finish is already on the banding, so once the strip is bonded and trimmed, the edge has a finished surface built in, reducing extra steps devoted directly to the band. Using a 600 foot roll in a woodworking shop means a single roll can serve many parts using the same CP41124 decorative callout, which helps maintain visual consistency across all edges in a run. Since the product is positioned as edge banding within Wurth Baer Supply's woodworking-focused inventory, it integrates into cabinet, furniture, or casework workflows that rely on PVC edgebanding as a standard finishing step.
Rehau 302164-198 is a PVC edge banding designed to finish exposed edges on panel-based components, so cabinet and furniture parts present a clean, unified appearance.
Rehau 302164-198 PVC edgebanding is 15/16 inch wide, giving coverage over standard 3/4 inch panels with extra material available for flush trimming during edge work.
Rehau PVC edge banding 302164-198 has a .018 inch thickness, so it applies as a thin band that follows panel edges closely and needs only light trimming.
The CP41124 designation identifies the specific decorative reference for this edgebanding, so it can be matched to projects that use that pattern in design or materials lists.
Rehau 302164-198 edgebanding is supplied in a 600 foot roll, supporting extended edging runs and multiple projects in a woodworking shop environment.
Rehau PVC edgebanding 302164-198 features an embossed lacquer finish, providing both surface texture and a finished appearance on the treated panel edge.
Rehau PVC edgebanding 302164-198 from Wurth Baer Supply combines a 15/16 inch width, .018 inch thickness, and an embossed lacquer CP41124 finish to support clean, consistent edge treatment on panel work. The 600 foot roll length suits professional woodworking shops planning repeated cabinet, furniture, or casework runs around a single decorative reference. When your project calls for PVC edge banding in this size and finish, this Rehau option aligns with production-focused workflows and helps you keep panel edges visually tied to the face surfaces.
Sold In: 1 Roll