Rehau PVC edgebanding 302164-214 is a PVC edge banding from Rehau, Inc. that covers exposed substrate edges, creating a finished edge that visually matches the chosen CP41065 design. The 15/16 inch width spans standard panel thicknesses with overhang for trimming, so installers can route or knife the edge flush after bonding. The .018 inch thickness provides a low-profile edge that blends with panel faces, useful when a thin, unobtrusive edge detail is preferred. The embossed CP41065 surface adds texture that coordinates with embossed laminates or board faces, helping the edge read as part of the overall surface pattern. The lacquered finish on this edgebanding simplifies cleaning of typical shop or site marks, helping the installed edge retain its appearance through normal handling. With a 600 foot length, this Rehau PVC edgebanding supports longer runs or multiple jobs from a single roll, reducing changeovers during cabinet or furniture production.
This Rehau PVC edgebanding is specified at 15/16 inch by .018 inch, giving installers a known interface for edgebanders or hand application tools. The 15/16 inch width provides slight overhang on common panel thicknesses, which allows trimming tools to flush the edge without exposing the substrate. The .018 inch thickness feeds smoothly through typical PVC edgebanding equipment set up for thin banding, supporting steady tracking along the edge. The 600 foot length means the material unwinds as a continuous strip, reducing splices along long cabinet or shelving runs. Because the material is PVC, it aligns with adhesive systems and trimming methods commonly used for PVC edge banding in cabinet shops and millwork operations.
Rehau PVC edgebanding 302164-214, classified by Wurth Baer Supply under Miscellaneous|Edgebanding and Edge Banding, is intended for edge treatment on wood-based components where PVC banding is specified. The CP41065 embossed designation ties this roll to a particular decorative design, so it fits projects already using the same CP41065 surface on faces or coordinated parts. At 15/16 inch wide, this edge banding suits typical cabinet doors, drawer fronts, and case panels made from engineered panels sized around that thickness range, providing coverage from face to face. The lacquered surface supports visually consistent edges on furniture or casework placed in interiors where a clean, finished look at eye level edges is important. With a 600 foot roll, this product aligns with production environments that process many similar parts, such as kitchen runs, closet systems, or commercial millwork components using matching PVC edges.
The nominated 15/16 inch by .018 inch size of this Rehau PVC edge banding sets up predictable machine settings, which helps reduce test passes when switching between Rehau rolls with the same dimensions. The thin .018 inch cross-section reduces the material removed during trimming, helping maintain the integrity of the CP41065 embossed and lacquered surface right up to the panel edge. Because the surface is embossed, it visually breaks up minor transitions at the glue line, supporting a more forgiving appearance where the face meets the edge. The lacquered finish assists in removing adhesive residue from the surface after pressing, which supports a cleaner joint line and reduces time spent cleaning every part. The 600 foot continuous length means fewer joins across cabinet or fixture runs, helping maintain uninterrupted grain or pattern direction where the CP41065 design is aligned along edges.
Rehau PVC edgebanding 302164-214 is used to cover exposed panel edges, providing a finished PVC edge that coordinates with the CP41065 embossed decorative design on cabinet or furniture components.
The 15/16 inch width gives slight overhang on standard panels, so installers can trim the banding flush, reducing risk of exposing the substrate along cabinet or shelving edges.
The .018 inch thickness feeds like typical thin PVC banding, allowing smooth processing through edgebanders and creating a low-profile edge that feels close to the adjacent panel face.
The CP41065 embossed designation indicates a specific textured decorative surface, so this edgebanding visually coordinates with panels or laminates carrying the same CP41065 pattern.
The lacquered finish on this PVC edgebanding gives a coated surface that allows easier wipe-off of glue residue or marks, helping edges present a more uniform appearance after trimming.
The 600 foot roll length supports long production runs, reducing roll changes and helping maintain consistent pattern direction and joint-free edges on multiple cabinet or furniture parts.
Rehau PVC edgebanding 302164-214 from Wurth Baer Supply combines a 15/16 inch by .018 inch format, CP41065 embossed design, lacquered finish, and 600 foot length to support efficient cabinet and furniture edge work. Use this specific Rehau PVC edge banding when projects call for PVC edges that coordinate with the CP41065 surface and benefit from thin, easily processed banding on production equipment.
Sold In: 1 Roll