Rehau PVC edgebanding gives cabinet and casework edges a finished PVC surface that covers raw substrate, so exposed edges match the surrounding panel visually and feel smoother during use. This Rehau, Inc. edge banding is identified as Manufacturer Part 302164-229, so shops can call out the exact material needed on cut lists and work orders. The 15/16 x .018 CP41178 EMB LAC 600FT description establishes that this is PVC edgebanding in a 15/16 inch nominal width and .018 inch thickness, so it works with common panel build-ups where a narrow but stable edge is preferred. The CP41178 EMB LAC reference provides a defined surface and finish pattern, allowing consistent appearance from job to job when the same code is specified. The 600FT length detail signals a continuous supply suitable for multiple cabinets or a small production run without frequent material changeovers.
The SAP description 15/16X.018 CP41178 EMB LAC 600FT gives installers a clear sizing and finish shorthand, so the correct Rehau edge banding can be assigned to specific panel thicknesses during layout. The 15/16 width supports coverage of standard board thickness with a modest margin, which reduces the material that needs to be trimmed after application while still protecting the edge. The .018 thickness detail defines a relatively thin PVC profile, which affects how the edge transitions to the panel face and how much material is removed during flush trimming. The CP41178 EMB LAC code links the banding to a particular surface character, so multiple installers on the same project can pull the same coded material and keep edges visually consistent.
This Rehau PVC edgebanding, identified as Manufacturer Part 302164-229, fits work where a 15/16 inch wide edge treatment matches the panel layout. The 15/16X.018 sizing connects directly to common engineered panels used in cabinetry and casework, so planning cut lists around this width simplifies edge coverage decisions. Because the product is classified under Edge Banding and Edgebanding, it is oriented toward finishing exposed edges on cabinets, shelving, and similar assemblies rather than broad surface lamination. The CP41178 EMB LAC reference gives a distinct appearance specification, which is useful when aligning door fronts, drawer fronts, and cabinet sides so their edges share the same finish code. The 600FT length supports shop environments where multiple pieces must be processed from a single lot, helping maintain continuity of look across a full room of cabinets or a run of similar furniture components.
The PVC material designation in the description signals a plastic edgebanding that responds predictably under standard shop tooling, which aids in setting up trimmers and edge-processing equipment for repeatable cuts. The .018 inch thickness value gives a known material cross-section, allowing installers to dial in trimming and scraping operations to remove just enough material for a flush edge without cutting into the panel surface. The 15/16 width leaves a controlled amount of overhang on typical casework dimensions, so final cleanup is focused and efficient rather than heavy removal. The CP41178 EMB LAC finish code acts as a repeatable visual reference, simplifying reorders when matching existing cabinetry or replacing damaged components from the same project line. The 600FT continuous length detail supports longer production schedules, so once equipment is tuned to this material, it can run extended batches without frequent material swaps.
The 15/16 x .018 detail indicates a relatively narrow, thin PVC strip, which suits standard cabinet panels and limits how much material must be trimmed after application.
The CP41178 EMB LAC code defines a specific finish and surface character, so matching this code keeps cabinet and casework edges visually consistent across related pieces.
Rehau PVC edgebanding is identified for edge banding applications, so it is suited to covering exposed panel edges where a defined PVC surface is desired.
The 600FT notation indicates an extended length supply, which supports processing multiple cabinet parts from one roll for a uniform appearance batch.
The .018 thickness value identifies a thin PVC profile, allowing precise trimming and scraping so the banding can be brought flush without heavy removal.
Manufacturer Part 302164-229 uniquely identifies this specific Rehau PVC edgebanding, simplifying reorders and communication between designers, shops, and suppliers.
This Rehau PVC edgebanding ties a 15/16X.018 dimension to the CP41178 EMB LAC finish and Manufacturer Part 302164-229, so each order references a precise width, thickness, and surface character. For cabinet and casework runs where consistent edge appearance and predictable trimming behavior matter, selecting this 600FT length format supports continuous processing under stable tooling settings. When a project calls for this specific combination of Rehau branding, PVC construction, and coded finish, this edge banding provides a clearly defined option.
Sold In: 1 Roll