Rehau PVC edgebanding 302164-233 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, so cabinet and furniture projects present a finished edge instead of exposed core material. The 15/16 inch width matches common 3/4 inch panels, giving a slight overhang that allows trimming flush for a tight, professional edge line. The .018 inch thickness provides a low-profile band that shapes easily, helping keep trimming steps controlled on straight runs and gentle curves. The CP20957 reference and embossed lacquer description point to a specific surface and finish combination, so color and texture alignment can be repeated consistently across multiple jobs using the same specification. Supplied in a 600 ft length, this edge banding supports longer production runs and repeat installations on the same project without frequent roll changes or part changes.
This Rehau PVC edge banding uses a 15/16 inch width, giving installers enough coverage to apply to standard 3/4 inch board edges and then trim back to the face for a clean, square edge. The .018 inch thickness keeps the material relatively thin, which can ease banding around modest contours and reduce the amount of material removed during trimming. The CP20957 embossed lacquer reference ties the band to a defined surface and finish style from Rehau, so the visual result can align with other components specified under the same finish code. With a total length of 600 ft, this roll format supports both one-off projects and small production runs where the same finish and dimension are required across multiple pieces.
This Rehau PVC edgebanding, classed as edge banding in the edgebanding category, is suited to panel-based work where PVC edge treatment is specified. The 15/16 inch width and .018 inch thickness align with common cabinet and furniture components built from approximately 3/4 inch sheet materials, so doors, drawer fronts, and exposed carcass edges can share the same banding dimension. The CP20957 embossed lacquer designation ties this banding to a defined finish family, so panels, fronts, and related parts using that finish can share a consistent edge appearance. With 600 ft on a roll, production of multiple cabinets or casework units using the same specification can proceed with fewer part changes, supporting a consistent look across an entire run.
The 15/16 inch width gives a predictable amount of overhang on a 3/4 inch panel, so trimming settings can remain consistent from part to part, reducing the need to adjust for variation in coverage. At .018 inch thick, the band presents a slim profile, which can help reduce observable edge buildup at doors and fronts when they meet, supporting tighter visual gaps. The PVC material aligns with standard PVC edgebanding processes, so heat-based or adhesive-based workflows designed around PVC can be applied to this product in line with existing shop practices. The CP20957 embossed lacquer reference allows shops to specify 302164-233 when a project calls for that particular finish code, supporting easier reordering by part number for future phases or service work. The 600 ft roll length also allows planning around predictable yield in linear feet, helping layout of cut lists and edge-processing sequences on repetitive jobs.
Rehau PVC edgebanding 302164-233 is 15/16 inch wide and .018 inch thick, which suits edging work on panels around 3/4 inch thick where a small trim allowance is useful.
The .018 inch thickness keeps the edge banding relatively thin, so trimming and flushing operations remove less material and can leave smoother transitions at edges and corners.
The CP20957 embossed lacquer description indicates a specific surface and finish style from Rehau, so ordering this part number targets that defined appearance on project edges.
The Rehau 302164-233 PVC edge banding is supplied in a 600 ft length, which supports edging multiple panels and fronts within the same specification.
This Rehau PVC edge banding fits cabinet, furniture, and panel-based projects that use approximately 3/4 inch material and call for the CP20957 embossed lacquer finish code.
The 15/16 inch width gives slight overhang on a 3/4 inch panel, which lets installers trim back to the faces to create clean, flush edges without exposing the core.
The Rehau PVC edgebanding 302164-233 combines 15/16 inch width, .018 inch thickness, the CP20957 embossed lacquer finish reference, and a 600 ft roll length to support repeatable, finished edges across panel projects. When a job is specified around this exact Rehau part number and finish designation, choosing this edge banding allows doors, fronts, and exposed carcass edges to share the same dimension and finish reference from piece to piece. For shops standardizing on a Rehau PVC edge banding solution with a defined code and substantial run length, this product provides a single, consistent option to cover those edge treatment needs.
Sold In: 1 Roll