Rehau PVC Edgebanding 302164-259 is PVC edge banding that finishes exposed panel edges on cabinetry and casework, so raw substrate is covered and ready for installation in visible locations. The 15/16 inch width gives coverage over standard 3/4 inch panels with margin for trimming, which helps installers flush-trim without risking chip-out on the face surface. The .018 inch thickness provides a low-profile edge, so doors and drawer fronts close without a bulky lip at the joint. The CP10040 designation identifies a specific color and texture combination within the Rehau line, which lets shops repeat a match across multiple jobs using the same reference. The EMB LAC detail further defines the finish type in that CP10040 series, supporting consistent appearance wherever this code is specified on drawings.
The 15/16 inch by .018 inch SAP description provides the working profile for this Rehau PVC edgebanding, so machine operators can dial in trimmer and scraper settings around a known width and thickness. That fixed size helps reduce setup variability between shifts or repeat jobs. The CP10040 EMB LAC coding identifies the intended visual finish within the Rehau system, so designers and buyers can specify this exact edge when coordinating with related surfaces. The 600 foot length in the SAP description means a single roll supports longer production sequences, which helps keep edge quality consistent from the first cabinet part through the last in a batch.
This Rehau PVC edgebanding, identified as 302164-259 and classified as Edge Banding, is suited to woodworking projects where exposed panel edges need a finished PVC face. The 15/16 inch width matches work on cabinet sides, doors, drawer fronts, and shelving based on common 3/4 inch substrates. Because it belongs to the Edgebanding product class, it fits into workflows where panels are cut, then edged before drilling and hardware installation. The CP10040 EMB LAC designation supports use wherever that specific Rehau finish is called out on drawings, allowing production shops and installers to use the same edge detail across matching components.
The defined 15/16 inch width gives operators a clear reference for bander table settings, so pressure wheels and trimmers can be configured around a predictable overhang on standard case parts. The .018 inch thickness guides cutter and flush-trim choices, which helps maintain consistent reveal lines when doors, fronts, and panels meet in a run of cabinetry. The Manufacturer Part # 302164-259 ties purchasing, inventory, and production documents to the same edgeband, so reorders supply the identical CP10040 EMB LAC finish specified on earlier work. The SAP description 15/16X.018 CP10040 EMB LAC 600FT links dimensions, finish, and length into one line item, so estimating and production planning can allocate footage and material appearance from a single code.
Rehau PVC Edgebanding 302164-259 is PVC edge banding in the Edgebanding product class, so it is used to finish exposed panel edges on cabinets and other casework.
Rehau PVC Edgebanding 302164-259 has a SAP description of 15/16X.018, so it is 15/16 inch wide and .018 inch thick for covering standard panel edges.
The CP10040 EMB LAC detail in the SAP description identifies a specific Rehau finish, so designers and shops can call out and repeat that same visual edge on multiple jobs.
The 600FT reference in the SAP description indicates a 600 foot length, so a single roll supports extended cabinet or casework edgebanding runs in the shop.
The manufacturer part number 302164-259 identifies this exact Rehau PVC edgebanding, so purchasing, inventory, and shop drawings all point to the same material.
The 15/16 inch width lets the edgebanding cover 3/4 inch panels with extra material, so trimming operations leave a clean, fully covered cabinet edge.
Rehau PVC Edgebanding 302164-259 combines a defined 15/16 inch by .018 inch profile, the CP10040 EMB LAC finish code, and a 600 foot length in one stocked item. That combination supports consistent edge appearance and sizing across cabinets, shelves, and fronts on a project. For shops and installers working from drawings that specify CP10040, using this exact part number ties material ordering directly to the design intent. Add this Rehau PVC edgebanding to your next run when you want a repeatable, coded edge detail that fits standard 3/4 inch casework.
Sold In: 1 Roll