Rehau PVC edgebanding 302164-262 15/16 x .018

Rehau PVC Edgebanding 302164-262 For Clean Edges

Rehau PVC edgebanding 302164-262 is a Rehau, Inc. edge banding designed to finish exposed panel edges in woodworking projects. The 15/16 inch width gives coverage over standard panel thickness with a small overhang, so trimming yields a flush, professional edge. The .018 inch thickness keeps the banding flexible around straight cabinet edges while keeping a low profile at corners, which helps minimize visible transitions after trimming and finishing. The CP20821 designation identifies the specific color or pattern line, which supports visual consistency across multiple panels on the same job. The EMB LAC reference identifies the surface style in this series, so matching to existing runs stays repeatable from project to project. The 600 foot length per roll supports longer production runs or multiple installs from a single SKU, reducing changeovers during cabinet or fixture work.

Key Rehau PVC Edgebanding Details For Projects

• The 15/16 inch width covers the full edge of typical sheet goods with extra material for trimming, which supports tight, flush alignment along cabinet sides and shelves.
• The .018 inch thickness keeps the edgebanding light and flexible, which helps it conform to panel edges and reduces excess material at corners when trimming.
• The PVC edgebanding construction suits use as edge banding on cabinetry and casework, giving a consistent edge appearance wherever the core material would otherwise be exposed.
• The CP20821 designation defines the specific Rehau appearance series, which helps maintain the same look when repeating this edgebanding across multiple builds.
• The EMB LAC reference identifies the surface style within the Rehau line, so edges around doors, drawer fronts, and panels can match each other visually.
• The 600 foot length supports extended runs of edge work from one roll, which can streamline shop workflow on larger cabinet or fixture projects.

Edgebanding Dimensions That Support Straight Runs

This Rehau PVC edgebanding uses a 15/16 inch width, which is wider than many common panel thicknesses, allowing a clean overhang on both faces for later trimming. That extra margin helps installers maintain coverage even when panel cuts vary slightly, since the banding still spans the entire edge. The .018 inch thickness keeps the strip easy to handle on straight cabinet edges, reducing resistance as it is pressed along the substrate. Because the material is edge banding in the PVC class, it is designed to sit as a slim layer over the substrate, helping keep the overall cabinet dimension near the original panel size after trimming. Together, the width and thickness support consistent, repeatable edges on cabinets, shelving, and similar woodworking applications.

How This Rehau Edge Banding Works In Use

Where Rehau PVC Edgebanding 302164-262 Fits

This product is categorized as edge banding and edgebanding within the woodworking-focused lineup at Wurth Baer Supply, so it is intended for finishing exposed panel edges on cabinets, casework, and similar builds. The 15/16 inch width suits common panel sizes used in cabinet and fixture construction, giving coverage along sides, tops, bottoms, and shelves where the core would otherwise show. As a Rehau PVC edgebanding, it fits jobs that call for PVC-based edge treatment rather than leaving raw edges visible. The CP20821 series identification ties this roll to a specific look, which helps when matching new work to existing cabinets or coordinating multiple components within one project. The EMB LAC reference identifies a defined surface style, supporting visual continuity on all edges where this banding is applied.

Why These Rehau 302164-262 Details Matter

The 15/16 inch by .018 inch format gives a balance between coverage and handling: the width provides trimming room for clean, flush reveals, while the slim thickness helps the banding sit close to the substrate and supports neat transitions at corners and ends. Because this is PVC edgebanding from Rehau, Inc., it is purpose-made for use as edge banding rather than general trim, which supports reliable behavior when adhered along cabinet and casework edges. The defined CP20821 and EMB LAC identifiers make this roll part of a repeatable system, helping shops return to the same appearance on follow-up jobs without re-matching from scratch. The 600 foot length supports production-style workflows, reducing the frequency of roll changes and keeping long runs of edges consistent from the first panel to the last.

Common Questions About Rehau 302164-262 Edgebanding

Select Rehau 302164-262 For Consistent Edge Work

Choose Rehau PVC edgebanding 302164-262 when a 15/16 inch by .018 inch PVC edge banding matches your cabinet or fixture layout. The defined CP20821 EMB LAC identifiers support repeatable color and surface matching, and the 600 foot length suits shop environments handling multiple woodworking projects.