Rehau PVC edgebanding identified as 302164-270 is edge banding designed to finish exposed panel edges in woodworking and cabinet projects, so raw substrate edges are covered and jobs present a uniform, professional look along doors, drawer fronts, and casework.
The 15/16 inch width stated in the SAP description gives coverage for common 3/4 inch panels while allowing trimming margin, so installers can flush-trim back to the face without leaving gaps or short reveals along cabinet or furniture edges.
The .018 inch thickness in the description means a relatively thin PVC edge, which reduces transition at the edge, helping panels feel closer to a single piece and simplifying alignment when edging multiple components that must meet cleanly.
The CP41215 EMB LAC reference in the description identifies a specific color and surface combination within the Rehau, Inc. PVC program, so shops can match this banding consistently across repeat runs where the same decor or laminate is used.
The 600FT notation in the description defines the running length, giving shops enough edgebanding for larger runs of casework, so crews can edge multiple cabinets or fixtures from a single length reference on the shop floor.
The stated 15/16 inch width provides enough overhang on both sides of a nominal 3/4 inch panel, giving automatic edgebanders and handheld trimmers material to work with, so operators can center the tape and still cleanly trim to the core.
The .018 inch thickness works well where a thinner PVC edge is preferred, so edgebander settings can be tuned for light trimming passes that leave minimal edge radius while still covering the substrate edge from corner to corner.
The 600FT length reference supports longer production sequences, so a line can run multiple cabinets, shelves, or partitions with fewer coil changes and more consistent feed conditions from the start to the end of a job.
The Rehau, Inc. identification ties this banding to the Rehau color and texture system, so shops can align this 302164-270 part number with existing panel programs and job folders when planning edging operations.
The Rehau PVC edgebanding, described as 15/16X.018 CP41215 EMB LAC 600FT, is suited to edging cabinet boxes, shelving, and similar panel constructions where a 3/4 inch core is common, so operators can load one size for many related parts.
The 15/16 inch width gives flexibility when running cabinet sides, tops, bottoms, and adjustable shelves on an edgebander, so slight panel thickness variations still finish with a centered band that trims cleanly on both faces.
The .018 inch thickness supports applications where a lean edge is wanted on doors or fronts, so reveal lines between components remain visually tight, supporting consistent joints when several edged panels meet at corners or in banks.
The CP41215 EMB LAC reference signals a specific surface and color combination within the Rehau line, so it can be assigned wherever that same decor appears on faces or laminate, helping project drawings and cutlists stay aligned with visible finishes.
The 600FT length supports runs that edge a series of cabinets for a room or bank of casework for a project, so the same color and batch of 302164-270 can carry through all fronts, ends, and shelves in that grouping.
The defined 15/16 inch width and .018 inch thickness in the SAP description give programmers fixed parameters for edgebander setup, so tape guides, trimming stations, and scraping programs can be dialed in and reused for this exact part number.
The Rehau, Inc. branding allows shops to tie 302164-270 to Rehau technical and decor systems already in place, so this edge can be slotted into existing material lists and CNC toolpath templates built around Rehau dimensions.
The CP41215 EMB LAC code helps distinguish this PVC edgebanding from other widths, colors, or embosses in inventory, so warehouse teams can pull the correct banding and keep production runs consistent from the first cabinet through the last.
The 600FT length reference in the description supports planning coil changes and run lengths, so supervisors can schedule how far one coil will carry through a job and group similar parts while the edgebander is set to this specific tape.
The combination of PVC material, 15/16 inch width, and .018 inch thickness defines a repeatable edge banding profile, so quality checks can focus on adhesive line, trimming, and corner detail rather than adapting to varying tape sizes from part to part.
Rehau PVC edgebanding 302164-270 with a 15/16 inch width suits edging around nominal 3/4 inch panels, providing extra material on each side for trimming back to a flush, clean edge.
Rehau PVC edgebanding 302164-270 at .018 inch thickness produces a relatively slim edge, so transitions from face to edge feel lighter and joints between adjacent parts appear tighter.
Rehau PVC edgebanding 302164-270 uses CP41215 EMB LAC in its description to identify a specific decor and emboss combination, helping match this edge banding to corresponding surfaces.
Rehau PVC edgebanding 302164-270 listed at 600FT length supports longer edging runs, so shops can process multiple cabinets or panels before changing over to another coil.
Rehau PVC edgebanding 302164-270 is identified as PVC edge banding from Rehau, Inc., so it aligns with Rehau decor systems many woodworking shops already specify for cabinet and panel projects.
Rehau PVC edgebanding 302164-270 uses that manufacturer part number to uniquely define this width, thickness, and decor combination, supporting accurate reorders and inventory tracking.
The Rehau PVC edgebanding 302164-270, described as 15/16X.018 CP41215 EMB LAC 600FT, ties width, thickness, and decor into one repeatable part, so cabinet and woodworking shops can specify a single code for matching edges across projects.
The 15/16 inch width and .018 inch thickness support edging around nominal 3/4 inch panels with a slim profile, so production teams can plan edgebander setups, coil usage, and job sequences around this Rehau, Inc. edge banding choice.
Sold In: 1 Roll