Rehau PVC edgebanding 302164-275 is a PVC edge banding designed to finish exposed panel edges in woodworking and cabinet projects. The 15/16 x .018 CP60461 EMB LAC size gives enough height to cover standard panel thicknesses while keeping the edge visually tight. The material is supplied in a 600 ft length, so shops can run long jobs or multiple projects without interrupting workflow. The PVC construction supports consistent trimming and scraping, which helps maintain a uniform edge profile along the entire run. The CP60461 EMB LAC designation identifies the specific texture and finish family, allowing projects to match an established design scheme on repeat work. As an edge banding within the Rehau line from Wurth Baer Supply, this product fits into typical cabinet, furniture, and casework production where a PVC edge finish is required.
This Rehau PVC edge banding in 15/16 x .018 sizing is suited to edging applications where a narrow, clean PVC strip is trimmed flush to the panel. The 15/16 in width allows a modest overhang above and below many substrate thicknesses, giving trimmers enough material to work while still keeping waste down. The .018 in thickness creates a relatively thin edge, which helps blades and routers produce a crisp transition between banding and panel face. With a 600 ft roll length, shops can set up edgebanders or manual workflows and run extended sequences without frequent changeover, supporting consistent edge appearance from the first piece to the last.
The Rehau PVC edgebanding 302164-275 is categorized as edge banding within the edgebanding class, aligning it with typical cabinet, furniture, and casework edge finishing needs in woodworking shops. The 15/16 x .018 dimension works for many engineered wood and laminate-based constructions where a slim PVC edge is required around shelves, doors, and panels. With a 600 ft roll, small and mid-size production runs can be supported from a single roll, which benefits environments that process batches of similar parts. The CP60461 EMB LAC designation ties this edgebanding to a specific Rehau finish group, helping shops apply it where that texture and look are part of an established material set.
The 15/16 in width on this Rehau PVC edge banding 302164-275 provides enough vertical coverage for typical panel thicknesses, which supports accurate trimming while still giving room for setup variations from part to part. At .018 in thick, the PVC layer is thin enough that edge trimming and scraping tools can cut cleanly, which helps reduce visible ridges and promotes a smooth feel at the transition between band and panel face. The 600 ft roll length means once the edgebander or manual station is dialed in, operators can keep running without reloading rolls, which helps hold a consistent appearance and color break along all edges in the run. The clearly defined CP60461 EMB LAC finish reference and 302164-275 part number let shops document the exact edge material used on a job, simplifying repeat orders and maintaining matching edges on future replacement or expansion work.
Rehau 302164-275 edgebanding is described as PVC edge banding, so it is made from PVC, providing a consistent plastic edge suitable for standard trimming and finishing methods.
Rehau PVC edgebanding 302164-275 is 15/16 in wide, giving coverage that supports flush trimming on many common cabinet and furniture panel thicknesses.
The CP60461 EMB LAC edgebanding has a thickness of .018 in, which supports a slim edge profile and helps trimming tools create a smooth transition at the panel face.
A roll of Rehau 302164-275 edge banding is 600 ft long, enabling extended runs on edgebanders or manual setups without frequent roll changes during a project.
The CP60461 EMB LAC designation identifies a specific Rehau finish and texture family, helping projects match this edgebanding to corresponding surfaces or previous work using the same code.
The 302164-275 part number gives shops a precise reference for this Rehau PVC edgebanding, simplifying reordering and keeping edge appearance consistent on repeat or expansion jobs.
Choose Rehau PVC edgebanding 302164-275 when a 15/16 x .018 PVC edge is needed for cabinet, furniture, or casework projects that specify the CP60461 EMB LAC finish family. The 600 ft roll supports efficient production runs while the defined size and finish help maintain consistent edges across panels. Using the 302164-275 part number through Wurth Baer Supply gives shops a clear reference for future orders, supporting uniform appearance on both current and follow-up work.
Sold In: 1 Roll