Rehau PVC edgebanding provides a PVC edge banding solution for covering exposed panel edges, so cabinet and furniture components gain a finished edge surface that is more consistent and easier to process than raw board edges. The 15/16 inch width gives coverage across typical panel thicknesses with some margin, which helps during trimming and routing without exposing the core material. The .018 inch thickness creates a slim edge profile that works well where a lighter edge is desired on casework or closet components. The CP10080 designation identifies this specific décor and surface setup, so repeat orders match previous runs that used the same code. The embossed lacquer, noted as EMB LAC, provides a textured lacquered surface, giving the edge a defined look that coordinates with matching surfaces. The 600 foot roll length supports longer runs in the shop, so installers and fabricators can handle multiple projects before changing rolls.
This Rehau PVC edgebanding uses a 15/16 inch width, which allows the installer to position the tape over the board edge with slight overhang and then trim back to a flush, straight edge during processing. The .018 inch thickness influences how the edge feels and looks after trimming, supporting builds where a low-profile band is preferred over a heavy edge. The embossed lacquer surface provides a textured lacquered finish, which can help the edge transition visually into matching laminates or coated panels during installation. The PVC construction offers a consistent edge material for routing and scraping, which helps keep install and finishing steps predictable across multiple panels.
This Rehau PVC edgebanding with a 15/16 inch width is suited to edge coverage on panels that fall within typical cabinet and furniture thickness ranges, giving enough coverage for clean trimming while avoiding excessive waste. The .018 inch thickness supports use on casework, closet systems, and similar panel constructions where a slim, understated edge is desired rather than a bulky profile. The CP10080 décor identification connects this roll to a specific color and surface pattern, making it useful when panels or doors already use the same décor and further parts must visually align. The embossed lacquer surface ties into applications using textured or lacquered faces, so vertical panels, shelves, and door edges present a coordinated appearance when finished.
The 15/16 inch by .018 inch sizing defines how this PVC band behaves during trimming, helping edgebanders and hand tools achieve a straight, flush edge without cutting into the substrate when set up correctly. The PVC material gives a controllable cutting and scraping response, which allows fabricators to dial in tooling for repeat runs with the same part number. The CP10080 code and 302164-299 manufacturer part number create a repeatable reference, which streamlines reordering for future jobs that must match previous installations. The embossed lacquer finish, designated as EMB LAC, sets a consistent surface texture and sheen along the edge, which supports uniform appearance from part to part in production runs. The 600 foot length per roll fits into shop workflows that handle multiple cabinets or room packages, so one roll can typically serve several related projects without interruption.
Rehau PVC edgebanding 302164-299 has a 15/16 inch width, giving coverage across common panel thicknesses and leaving enough overhang for trimming to a clean, flush edge.
The 302164-299 edge banding is .018 inch thick, creating a slim edge profile that works well where a lighter, less pronounced edge appearance is desired on panels.
CP10080 EMB LAC indicates the specific décor and embossed lacquer surface of this Rehau PVC edgebanding, helping projects maintain a consistent color and textured finish across parts.
The Rehau 302164-299 PVC edgebanding roll is 600 feet long, supporting extended cabinet or furniture production runs with fewer roll changes during processing.
This Rehau PVC edge banding suits cabinet, furniture, and panel applications needing a slim .018 inch edge, a 15/16 inch coverage width, and a CP10080 embossed lacquer décor surface.
This edgebanding uses PVC material, giving a uniform synthetic edge that trims and routes predictably, which helps maintain consistent results across multiple panels in production.
This Rehau PVC edgebanding, defined by its 15/16 inch width, .018 inch thickness, and CP10080 embossed lacquer décor, supports projects that need consistent edge appearance along cabinets and panels. The 600 foot roll gives extended run capacity for shop or job-based work. When a project calls for PVC edge treatment that aligns with the CP10080 décor and textured lacquer finish, this 302164-299 part number offers a direct match for ongoing or repeat installations.
Sold In: 1 Roll